User Guide Cordless Digital Telephone 2060isdn

Switching functions
42
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98
A30853-X210-B101-1-19
Parking an external call
You can park a call under a parking code and unpark it
again under the same code at another telephone, such as
a mobile unit. A call can be parked for up to three minutes.
If you park a call you can unpark it only at the same point-
to-multipoint access (Glossary, ➔ page 98).
If, for example, your configuration has two base stations
operating via a common point-to-multipoint access, you
can park an external call at one base station and unpark it
at the other, which means that you do not have to break
the connection. In this way you can virtually double the
range of your mobile unit.
You are conducting an external call and want to continue
at another mobile unit.
t Meaning: see footnote
Unparking an external call
You can unpark a call only at the point-to-multipoint
access at which it was originally parked.
(
Activating external call forwarding
You can forward an external call to another external user.
You can configure call forwarding for point-to-multi-
point or point-to-point access. There are three types of
external call forwarding (Glossary, ➔ page 98):
● immediate (direct),
● on busy,
● timeout after no answer (after 5 rings).
The mobile unit is idle. Open the “Forwarding on” menu.
t Meaning: see footnote
.
t
Service
t
Park
o
x
Enter a digit: this is the one-digit parking code which you
must also confirm. The call is parked.
The connection is not cleared down: instead, the call is
placed on hold.
OK
Ž
The mobile unit at which you want to unpark the call is
idle.
.
t
Service
t
Cancel call park
o
x
Enter the original parking code and confirm your entry.
The call is unparked and you can resume your conversa-
tion.
OK
.
t
Service
t
Forwarding on
t
means: browse with
u
or
u
and
press
x
to confirm
Z
NEXT
OK