User Guide Cordless Digital Telephone 2060isdn

Locks
49
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98
A30853-X210-B101-1-19
Locks
Lock for outgoing calls (system lock)/emergency phone numbers
You can use the system lock to prevent your base station
being used for outgoing calls. Incoming calls can be an-
swered.
Exception: Emergency phone numbers can be called
even when the system lock is active. You can define and
save a maximum of four emergency phone numbers,
each consisting of up to 16 digits.
t Meaning: see footnote
The options at your disposal are as follows:
Editing lock numbers/activating and deactivating call barring
Lock numbers enable you to bar entire sets of destina-
tions - phone numbers beginning with these lock num-
bers cannot be dialed. If, for example, you define “00” as
a lock number, your system cannot be used to place inter-
national calls. You can save a maximum of three lock num-
bers (each consisting of between 1 and 8 digits) for each
mobile unit.
Ž
The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.
t
Service
t
System settings
t
System lock
t
Lock on
Activate/deactivate lock
t
Phone No. list
Check/change the emergency phone numbers.
You can select emergency phone numbers from the list
and change them as applicable.
t
New entry
Add a new emergency phone number.
t
Delete phone No.
Delete individual emergency phone numbers.
Dialing is not possible if you have system lock
with emergency phone numbers activated at
the same time as telephone lock with direct sta-
tion selection. Exception: the DSS number is
also the emergency phone number.
Ž
The comfort mobile unit is idle. You will be prompted to
enter the system code in the course of this procedure
(default code: “0000”).
.
t
Service
t
System settings
t
Call barring
t
means: browse with
u
or
u
and
press
x
to confirm
Z
NEXT
OK