User Guide Cordless Digital Telephone 2060isdn

Locks
51
I_KAP03.FM5
Gigaset 2060isdn, Inland:
8.12.98
A30853-X210-B101-1-19
t Meaning: see footnote
This is the menu for blocking unwanted calls. The options
at your disposal are as follows:
Deactivating unwanted calls blocking
You do not have to go through the Service menu in order
to deactivate unwanted calls blocking.
Setting user access rights
By defining access rights for each registered mobile unit
you determine which internal users can place external,
charged calls.
All devices have unrestricted trunk access by default.
1. Unrestricted trunk access (= default)
The device can be used to conduct incoming and
outgoing external calls.
2. Incoming-only access
The device can be used only to answer incoming
calls. All external dialing options are disabled.
3. Internal-only access
The device can be used only to conduct internal
calls. All external dialing options are disabled. You can
conduct a consultation call with a user with internal-
only authorization, but you cannot transfer the call to
this user. You will be recalled if you attempt to do so.
t Meaning: see footnote
Ž
The comfort mobile unit is idle.
.
t
Service
t
Sel. call enable
t
Enable ring
Activate/deactivate unwanted call blocking.
All incoming calls are blocked if you do not define a num-
ber.
t
Phone No. list
Check/change phone numbers for wanted calls.
t
New entry
Add new phone number for wanted calls.
t
Delete phone No
Delete individual phone number as origin of wanted calls.
c
Press the off-hook key
.
t
Set sys funct.
t
Sel. call enable
u
Press this key to deactivate unwanted calls blocking.
OFF
t
means: browse with
u
or
u
and
press
x
to confirm
Z
NEXT
OK