Datasheet

ManualsBrandsSiemens ManualsCircuit BreakersPower Switch 1.4 ... 2A

Data sheet 3RV1011-1BA15

CIRCUIT-BREAKER, SIZE S00, FOR MOTOR PROTECTION,

CLASS 10, A REL. 1.4...2A, N REL. 26A, SCREW CONNECTION,

STANDARD BREAKING CAPACITY W. TRANSV. AUX. SWITCH

1NO/1NC

product brandname SIRIUS

Product designation Circuit breaker

Design of the product For motor protection

General technical data

Size of the circuit-breaker S00

Size of contactor can be combined company-specific S00

Product extension

● Auxiliary switch

Yes

Power loss [W] total typical 6W

Insulation voltage with degree of pollution 3 rated

value

690V

Surge voltage resistance rated value 6kV

maximum permissible voltage for safe isolation

● in networks with grounded star point between

main and auxiliary circuit

400V

● in networks with grounded star point between

main and auxiliary circuit

400V

Protection class IP

3RV1011-1BA15 Subject to change without notice

Page 1/

Show actual product details

Summary of content (7 pages)

PAGE 1
Show actual product details Data sheet 3RV1011-1BA15 CIRCUIT-BREAKER, SIZE S00, FOR MOTOR PROTECTION, CLASS 10, A REL. 1.4...2A, N REL. 26A, SCREW CONNECTION, STANDARD BREAKING CAPACITY W. TRANSV. AUX.
PAGE 2
● on the front IP20 ● of the terminal IP00 Mechanical service life (switching cycles) ● of the main contacts typical 100 000 ● of auxiliary contacts typical 100 000 Electrical endurance (switching cycles) ● typical 100 000 Type of protection Increased safety Protection against electrical shock finger-safe Equipment marking acc. to DIN EN 81346-2 Q Ambient conditions Installation altitude at height above sea level maximum 2 000 m Ambient temperature ● during operation -20 ...
PAGE 3
Number of NC contacts ● for auxiliary contacts — Note 1 1 Number of NO contacts ● for auxiliary contacts — Note 1 1 Number of CO contacts ● for auxiliary contacts 0 Operating current of auxiliary contacts at AC-15 ● at 24 V 2A ● at 110 V 2A ● at 120 V 2A ● at 125 V 2A ● at 230 V 0.5 A Operating current of auxiliary contacts at DC-13 ● at 24 V 1A ● at 60 V 0.
PAGE 4
● for single-phase AC motor — at 230 V rated value 0.125 hp ● for three-phase AC motor — at 460/480 V rated value 0.
PAGE 5
● for main contacts with screw-type terminals 0.8 ... 1.2 N·m ● for auxiliary contacts with screw-type terminals 0.8 ... 1.2 N·m Design of the thread of the connection screw ● for main contacts M3 ● of the auxiliary and control contacts M3 Safety related data B10 value ● with high demand rate acc. to SN 31920 5 000 Proportion of dangerous failures ● with low demand rate acc. to SN 31920 50 % ● with high demand rate acc. to SN 31920 50 % Failure rate [FIT] ● with low demand rate acc.
PAGE 6
Further information Information- and Downloadcenter (Catalogs, Brochures,…) http://www.siemens.com/industrial-controls/catalogs Industry Mall (Online ordering system) https://mall.industry.siemens.com/mall/en/en/Catalog/product?mlfb=3RV1011-1BA15 Cax online generator http://support.automation.siemens.com/WW/CAXorder/default.aspx?lang=en&mlfb=3RV1011-1BA15 Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.