Datasheet

ManualsBrandsSiemens ManualsCircuit BreakersPower Switch 4.5 ... 6.3A

Data sheet 3RV1011-1GA15

CIRCUIT-BREAKER SIZE S00, FOR MOTOR PROTECTION,

CLASS 10, A-REL. 4.5...6.3A, N-REL. 82A SCREW TERMINAL,

STANDARD SWITCHING CAPACITY, W. TRANSV. AUX. SWITCH

1NO+1NC

product brandname SIRIUS

Product designation Circuit breaker

Design of the product For motor protection

General technical data

Size of the circuit-breaker S00

Size of contactor can be combined company-specific S00

Product extension

● Auxiliary switch

Yes

Power loss [W] total typical 6W

Insulation voltage with degree of pollution 3 rated

value

690V

Surge voltage resistance rated value 6kV

maximum permissible voltage for safe isolation

● in networks with grounded star point between

main and auxiliary circuit

400V

● in networks with grounded star point between

main and auxiliary circuit

400V

Protection class IP

3RV1011-1GA15 Subject to change without notice

Page 1/

Show actual product details

Summary of content (7 pages)

PAGE 1
Show actual product details Data sheet 3RV1011-1GA15 CIRCUIT-BREAKER SIZE S00, FOR MOTOR PROTECTION, CLASS 10, A-REL. 4.5...6.3A, N-REL. 82A SCREW TERMINAL, STANDARD SWITCHING CAPACITY, W. TRANSV. AUX.
PAGE 2
● on the front IP20 ● of the terminal IP00 Mechanical service life (switching cycles) ● of the main contacts typical 100 000 ● of auxiliary contacts typical 100 000 Electrical endurance (switching cycles) ● typical 100 000 Type of protection Increased safety Protection against electrical shock finger-safe Equipment marking acc. to DIN EN 81346-2 Q Ambient conditions Installation altitude at height above sea level maximum 2 000 m Ambient temperature ● during operation -20 ...
PAGE 3
Number of NC contacts ● for auxiliary contacts — Note 1 1 Number of NO contacts ● for auxiliary contacts — Note 1 1 Number of CO contacts ● for auxiliary contacts 0 Operating current of auxiliary contacts at AC-15 ● at 24 V 2A ● at 110 V 2A ● at 120 V 2A ● at 125 V 2A ● at 230 V 0.5 A Operating current of auxiliary contacts at DC-13 ● at 24 V 1A ● at 60 V 0.
PAGE 4
● for single-phase AC motor — at 110/120 V rated value 0.25 hp — at 230 V rated value 0.5 hp ● for three-phase AC motor — at 200/208 V rated value 1 hp — at 220/230 V rated value 1.
PAGE 5
● for auxiliary contacts — single or multi-stranded 2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²) Tightening torque ● for main contacts with screw-type terminals 0.8 ... 1.2 N·m ● for auxiliary contacts with screw-type terminals 0.8 ... 1.2 N·m Design of the thread of the connection screw ● for main contacts M3 ● of the auxiliary and control contacts M3 Safety related data B10 value ● with high demand rate acc. to SN 31920 5 000 Proportion of dangerous failures ● with low demand rate acc.
PAGE 6
General Product Approval Declaration of Conformity Test Certificates For use in hazardous locations Shipping Approval spezielle Prüfbescheinigunge n Shipping Approval other Bestätigungen sonstig Umweltbestätigung other Further information Information- and Downloadcenter (Catalogs, Brochures,…) http://www.siemens.com/industrial-controls/catalogs Industry Mall (Online ordering system) https://mall.industry.siemens.
PAGE 7
5 45 5 / L3 22 13 NC NO 14 90 21 3 / L2 45 1 / L1 70 2 / T1 -F 4 / T2 6 / T3 1/L1 3/L2 5/L3 I> I> 3RV1011-1GA15 Page 7/7 21 14 22 I> 2/T1 4/T2 6/T3 last modified: 13 02/08/2017 02/09/2017 Subject to change without notice © Copyright Siemens AG