Data Sheet for Product

Technical Instructions CP 567 Control Cabinets
Document Number 155-272P25
October 12, 2017
Page 6 Siemens Industry, Inc.
Controls Installation
NOTE: It might be easier to remove the door from the cabinet and then mount the
controls onto the door or the mounting plate.
1. The space required for the controls mounted in the door or the mounting plate is
shown in Table 4. Space available between the door and the mounting plate is
shown in Figure 4, Table 5, and Table 6.
2. Arrange the controls on the mounting plate to avoid interference with the controls
on the door. Arrange the controls in logical groupings for easy access to fitting and
wiring terminals. Table 4 shows the approximate space required for controls
frequently mounted on the mounting plate in the cabinet.
3. In some cases it might be easier to remove the mounting plate to mount the
controls.
4. Mount the controls to the perforated mounting plate with standard sheet metal
screws.
5. When routing tubing or wires from the controls mounted on the door, allow
sufficient slack to prevent excessive stress.
6. Bundle and tie tubing and wires separately.
Figure 2. Wall Mount Cabinet Components.