Datasheet

Interrupts/diagnostics/status information
Diagnostics indication LED
● RUN/STOP LED
Yes
● ERROR LED
Yes
● MAINT LED
Yes
Integrated Functions
Number of counters 4
Counting frequency (counter) max. 100kHz
Frequency measurement Yes
controlled positioning Yes
Number of position-controlled positioning axes, max. 8
Number of positioning axes via pulse-direction
interface
Up to 4 with SB 1222
PID controller Yes
Number of alarm inputs 4
Potential separation
Potential separation digital inputs
● Potential separation digital inputs
500V AC for 1 minute
● between the channels, in groups of
1
Potential separation digital outputs
● Potential separation digital outputs
Relays
● between the channels
No
● between the channels, in groups of
2
EMC
Interference immunity against discharge of static electricity
● Interference immunity against discharge of
static electricity acc. to IEC 61000-4-2
Yes
— Test voltage at air discharge
8kV
— Test voltage at contact discharge
6kV
Interference immunity to cable-borne interference
● Interference immunity on supply lines acc. to
IEC 61000-4-4
Yes
● Interference immunity on signal cables acc. to
IEC 61000-4-4
Yes
Interference immunity against voltage surge
● Interference immunity on supply lines acc. to
IEC 61000-4-5
Yes
Interference immunity against conducted variable disturbance induced by high-frequency fields
● Interference immunity against high-frequency
radiation acc. to IEC 61000-4-6
Yes
Emission of radio interference acc. to EN 55 011
● Limit class A, for use in industrial areas
Yes; Group 1
6ES7212-1BE40-0XB0 Subject to change without notice
Page 7/
9
04/01/2020 © Copyright Siemens