Data Sheet

Data sheet 6GT2600-5AE00

Product type designation MDS D521 transponder

Transponder MDS D521 only for RF200/RF300 Gen2 Tool pill in

metal, ISO 15693, chip type FUJITSU MB89R112, 8192-byte FRAM

user memory 10 x 4.5 mm (DxH); Minimum order quantity 10 units

Suitability for operation RF200, RF300

Wireless frequencies

Operating frequency / Rated value 13.56MHz

Range / maximum 5mm; range is reader dependent: observe

http://support.automation.siemens.com/WW/view/en/67384964

Protocol / with radio transmission ISO 15693

Transfer rate / with radio transmission / maximum 26.5kbit/s

Product feature / multitag-capable Yes

Electrical data

Product component / Backup battery No

Memory

Type of memory FRAM

Storage capacity / of the user memory 8192byte

Type of memory organization UID (fixed code) 8 bytes, user memory 8192 bytes, configuration

memory 40 bytes

Number of read cycles / at ambient temperature < 40

°C / maximum

1000000000000

6GT2600-5AE00 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6GT2600-5AE00 Product type designation MDS D521 transponder Transponder MDS D521 only for RF200/RF300 Gen2 Tool pill in metal, ISO 15693, chip type FUJITSU MB89R112, 8192-byte FRAM user memory 10 x 4.5 mm (DxH); Minimum order quantity 10 units Suitability for operation RF200, RF300 Wireless frequencies Operating frequency / Rated value 13.56 MHz Range / maximum 5 mm; range is reader dependent: observe http://support.automation.siemens.
PAGE 2
Number of write cycles / at ambient temperature < 40 °C / maximum 1000000000000 Data retention time / at ambient temperature < 40 °C / not less than 10 y Property of memory Block-by-block write protection of the user memory Type of transponder chip used Fujitsu MB89R112 Mechanical data Material Epoxy resin Color black Mounting distance / relating to metal surfaces / recommended / minimum 0 mm Permitted ambient conditions Ambient temperature ● during read/write access -25 ...