Data Sheet for Product

ManualsBrandsSiemens ManualsFire - Addressable ModulesPSC-12 / PTB / PSX-12 Módulo de Fuente de Poder y Cargador, Ficha técnica

FireFinder



XLS System Overview

6300

s Industry, Inc.

Building Technologies Division

Data Sheet

Fire Safety Products

FireFinder

XLS

Advanced Fire Alarm Control Panel

System Overview

FireFinder XLS is a microprocessor-based, advanced

fire-safety system that has a 6" display and large, lighted

buttons; making it a highly intuitive fire-alarm user

interface. Additionally, each FireFinder XLS panel has a

unique multiprocessor ‘Network’ design – as well as

providing connectivity to detection devices.

FireFinder XLS is ideally suited for commercial,

institutional and industrial fire detection and notification

applications. This FACP complies with the requirements

of NFPA Standard 72, and is listed by Underwriters

Laboratories under their UL 864 standard.

Underwriters Laboratories of Canada also lists

FireFinder XLS FACPs under ULC-S527.

FireFinder XLS is Factory Mutual (FM

3010) Approved; as

well as California State Fire Marshals (CSFM

7165-

0067:0222)

and NYC Fire Department (

6160) Approved.

Additionally, FireFinder XLS is UL Listed under the category

UUKL for smoke control.

FireFinder XLS is also UL Listed and FM Approved for

Sinorix® clean-agent systems and pre-action or deluge

sprinkler systems, which include foam or water applications.

FireFinder XLS operates on the releasing requirements

specified in NFPA 13 and 2001.

FireFinder XLS is listed as a Fireman's Smoke Control Station

in high-rise office buildings, malls and other large structures.

• Standard / 2500-point-capacity

addressable fire-alarm control

panel (FACP)

• Ability to network with other

FireFinder XLS systems

• Powerful, easy-to-use

programming capabilities

• Fully field programmable, via

Windows

laptop PC

• 6" (15.2 cm), backlit LCD display

• User-friendly system interface

• Touch screen for maintenance

operations and function keys

• Global annunciation and control

capability

• Multi-language display

• Universal AC power input:

120VAC – 240VAC @ 50 / 60Hz

• 12 amps of system power

(expandable to 48 amps)

• Numerous Relays: Alarm, Trouble,

Programmable, etc.

• SureWire

addressable-loop technology

• Polarity-insensitive detection circuits

(patented)

• Useful diagnostic LEDs on all cards

• Supports FirePrint

application-specific

detection

• Intelligent / analog detection circuits:

‘Class A’ or ‘Class B’

• Supports single-person ‘ Walk Test ‘

• Seismic certified

• Supported by all Fire Safety

Management Stations

• Multiple command stations

• Menu-driven operator commands

• 5000-event, history-logging capability

with on-line and off-line reports

• Multiple levels of password protection

• Automatic environmental compensation

for smoke detectors

• Alarm verification

▪ by device or zone

• Pre-alarm operation

• Logic-controlled output functions

• Time-based-controlled output functions

• Holiday schedule

• City tie / leased line

• 200 notification-appliance-circuits

(NACs) capacity

• Up to 3.0 amps (24VDC) per NAC

• Built-in strobe synchronization protocol

• Supports pre-action,

deluge and agent releasing

• Voice evacuation system (optional)

• NEC 760 power-limited circuits

▪ ( UL 864 Compliant)

• Intelligent interface to building / process

management systems

• Operates as interactive peer with other

XLS or XLSV units in a XNET network

• Detector Sensitivity Readout / Printout

▪ per NFPA 72

ARCHITECT AND ENGINEER SPECIFICATIONS

• Modular assembly

• Supervised remote printer

• 32-character custom messages

▪ 40 programmable macro, function buttons

• Interface for use with remote printers

• Security-device monitoring

▪ ( UL 1076 Listed)

• Sprinkler Supervision

• Degrade-mode operation

• User help screens

• Coded outputs

• Distributed processing

• UUKL Listed for smoke control

• UL 864 9

Edition Listed & ULC Listed;

FM, CSFM & NYC Fire Dept. Approved

Summary of content (12 pages)

PAGE 1
Data Sheet s Fire Safety Products FireFinder® XLS Advanced Fire Alarm Control Panel ARCHITECT AND ENGINEER SPECIFICATIONS • • • • Powerful, easy-to-use programming capabilities • Global annunciation and control capability • • • • • • User-friendly system interface Multi-language display Universal AC power input: 120VAC – 240VAC @ 50 / 60Hz 12 amps of system power (expandable to 48 amps) Numerous Relays: Alarm, Trouble, Programmable, etc.
PAGE 2
System Overview ─ (continued) The FireFinder XLS system has been seismic qualified in accordance with: ▪ International Building Code, 2006 Edition ▪ ▪ ▪ ▪ ▪ California Building Code, 2007 Edition ASCE Standard 7, 2005 Edition OSHPD, OSP-0057-10 OSHPD CAN 2-1708A.5, Rev.
PAGE 3
FireFinder XLS Components ─ (cont.’d) Model ZIC-4A plugs into one (1) slot in the Model CC-5 or Model CC-2 card cage, and has on-board LEDs for system status and troubleshooting. Indication of power, communication, internal operation, and ground-fault conditions are provided, as well as indication of circuit activation or Trouble conditions.
PAGE 4
FireFinder XLS Components ─ (cont.’d) MLC - MXL Line Card [for FireFinder XLS] The MXL Line Card (Model MLC) is an optional card for the FireFinder XLS panel that supplies two (2) intelligent analog circuits, utilizing the Model ‘ I ‘ series; Model ‘ ID ‘ series; Model ` IL ‘ series or Model ‘ FP ‘ series-type intelligent devices.
PAGE 5
FireFinder XLS Components ─ (cont.’d) CC-2 →Card Cage-2 Slots CC-5 →Card Cage-5 Slots CC-5 / CC-2 Card Cages The Models CC-5 / CC-2 card cages provide the physical mounting location and all wiring connection points for all fire-and-voice system options cards for the FireFinder XLS system. Model CC-5 has five (5) slots, while Model CC-2 has two (2) slots. All cards plugged into the CC-5 / CC-2 card cage communicate with other FireFinder XLS modules via a common data bus.
PAGE 6
FireFinder XLS Components ─ (cont.’d) PSC-12 → Power Supply Charger Module PSC-12 Power Supply Charger Module The Power Supply Charger Module (Model PSC-12) is a high-current power supply that provides the FireFinder XLS primary-regulated 24VDC power to operate. Model PSC-12 is rated at 12Amps (Alarm) / 5Amps (Standby), and has a built-in battery charger, capable of charging up to 100 AH batteries.
PAGE 7
FireFinder XLS Components ─ (cont.’d) RNI Remote Network Interface System-Status Display SSD-Series System-Status Display CAB1 → Single Row Enclosure The System Status Display (SSD-series model displays) is a remote LED / LCD display that shows the local status of a FireFinder XLS system. An LED illuminates when Alarm, Supervisory, Trouble, and Security events occur on the system. A (4) four-line liquid-crystal display (LCD) will give details of the event in alphanumeric form.
PAGE 8
FireFinder XLS Components ─ (cont.’d) CAB2 → Two-Row Enclosure CAB2 Two-Row Enclosure The Two-Row Enclosure (Model CAB2) is the mid-sized FireFinder XLS enclosure capable of housing up to two (2) Model CAB-MP cabinet mounting plates. The inner door has two (2) rows of four (4) mounting slots. The outer door has space for mounting two (2) outer door plates (Models OD-LP, OD-BP or OD-GP), and can be configured to open from either side.
PAGE 9
FireFinder XLS Components ─ (cont.’d) ID-MP Inner Door Mounting Plate Combinations are also allowed. Blank spaces in Model IDMP can be covered using the blank-control-module plate (Model BCM). Up to four (4) modules can be mounted in a single row on the inner door. OD-BP → Outer Door Blank Plate OD-BP Outer Door Blank Plate The Outer Door Blank Plate (Model OD-BP) entirely covers an unused row of a XLS system cabinet, and is mounted on the outer door.
PAGE 10
FireFinder XLS Components ─ (cont.’d) XLS-MSE2-ADPT →Enclosure Adapter REMBOX2 → Two-Module Remote Enclosures REMBOX2 Two Module Remote Enclosures Model REMBOX2 has two (2) inner-door module spaces, and can hold a single Person Machine Interface, up to two (2) switch module brackets and one (1) Model LVM. Combinations are also allowed. Model REMBOX2 can also mount a single RNI remote network interface on a bracket included in the backbox.
PAGE 11
FireFinder XLS Components ─ (cont.’d) XLS-MSE3-ADPT →Enclosure Adapters VPM-MP → VESDA Mounting Plate XLS-MSE3/R-ADPT – XLS MSE-3L/R or MSE-3M/R Enclosure Adapters Model XLS-MSE3-ADPT is an adapter that allows FireFinder XLS cards to be mounted in former MXL-IQ Model MSE-3L or Model MSE-3M black enclosure. Model XLS-MSE3R-ADPT is an adapter that allows FireFinder XLS cards to be mounted in former MXLIQ Model MSE-3LR or Model MSE-3MR red enclosure.
PAGE 12
Details for Ordering Model Part Number Details for Ordering ─ (continued) Description AC-ADPT 500-633992 BCL 599-633997 CAB1 CAB1R CAB1-TK CAB1R-TK CAB2-BB CAB2-RB CAB2-BD CAB2-RD CAB2-TK CAB2R-TK CAB2-XBD 500-633007 500-633728 500-633013 500-633729 500-633009 500-634941 500-633008 500-633755 500-633014 500-633753 500-633768 CAB2-XRD 500-633792 CAB3-BB CAB3-RB CAB3-BD CAB3-RD CAB3-TK CAB3R-TK CAB3-XBD 500-633011 (3) Three-Row Back Box, black 500-634942 (3) Three-Row Back Box, red 500-633010 (3)