Data Sheet for Product

s Industry, Inc.
Building Technologies Division
–10–
FireFinder XLS Components ─ (cont.’d)
REMBOX2 → Two-Module Remote Enclosures
REMBOX2 Two Module Remote Enclosures
Model REMBOX2 has two (2) inner-door module spaces,
and can hold a single Person Machine Interface, up to two
(2) switch module brackets and one (1) Model LVM.
Combinations are also allowed.
Model REMBOX2 can also mount a single RNI remote
network interface on a bracket included in the backbox.
A bracket, known as Model REMBOX2-MP, can be used to
mount up to four (4) Model OCM-16 output control
modules or SIM-16 supervised input modules.
Model REMBOX2-MP must be purchased separately.
Approximate size of Model REMBOX2 is 14-1/2” (36.8cm.)
wide, 18-1/2” (47cm.) high and 5” (12.7cm.) deep.
REMBOX4 → Four-Module Remote Enclosures
REMBOX4 Four-Module Remote Enclosures
Model REMBOX4 has space for mounting four (4) inner-door
modules. Any combination of A Person Machine Interface
(two-module spaces); switch module brackets; Model
LVM, or Model FMT (one-module space each) can be
used. Unused module spaces can be covered with Model
ID-SP blank plates. Model REMBOX4 can also mount a
single, remote network interface (Model RNI) on a
bracket included in the backbox.
A bracket known as Model REMBOX4-MP can be used to
mount up to eight (8) output control modules (Model
OCM-16) or supervised input modules (SIM-16).
Approximate size of Model REMBOX4 is 24” (61cm.)
wide, 18-1/2” (47cm.) high and 5” (12.7cm.) deep.
Model REMBOX4-MP must be purchased separately.
XLS-MSE2-ADPT →Enclosure Adapter
XLS-MSE2/R-ADPT – XLS MSE-2/R Enclosure Adapter
Model XLS-MSE2-ADPT, which must be used in conjunction
with Model CAB-MP, is an adapter that allows FireFinder
XLS cards to be mounted in former MXL Model MSE-2
small black enclosures.
Model XLS-MSE2R-ADPT, which must be used in
conjunction with Model CAB-MP, is an adapter that allows
FireFinder XLS cards to be mounted in former MXL
Model MSE-2R small red enclosures.
XLS-MME3-ADPT →Enclosure Adapters
XLS-MME3/R-ADPT – XLS MME-3/R or MBR-2
Enclosure Adapters
Model XLS-MME3-ADPT, which must be used in
conjunction with Model CAB-MP, is an adapter that allows
FireFinder XLS cards to be mounted in former MXL
Model MME-3 or Model MBR-2 medium black enclosures.
Model XLS-MME3R-ADPT, which must be used in
conjunction with Model CAB-MP, is an adapter that allows
FireFinder XLS cards to be mounted in former MXL
Model MME-3R medium red enclosures.
XLS-MLE6-ADPT →Enclosure Adapter
XLS-MLE6/R-ADPT – XLS MLE-6/R Enclosure Adapter
Model XLS-MLE6-ADPT, which must be used in
conjunction with Model CAB-MP, is an adapter that
allows FireFinder XLS cards to be mounted in former
MXL Model MLE-6 large black enclosures.
Model XLS-MLE6R-ADPT, which must be used in
conjunction with Model CAB-MP, is an adapter that
allows FireFinder XLS cards to be mounted in former
MXL MLE-6R large red enclosures.