Data Sheet for Product

s Industry, Inc.
Building Technologies Division
–6–
FireFinder XLS Components ─ (cont.’d)
PSC-12 → Power Supply Charger Module
PSC-12 Power Supply Charger Module
The Power Supply Charger Module (Model PSC-12) is a
high-current power supply that provides the FireFinder
XLS primary-regulated 24VDC power to operate. Model
PSC-12 is rated at 12Amps (Alarm) / 5Amps (Standby),
and has a built-in battery charger, capable of charging up to
100 AH batteries. Model PSC-12 is an addressable-
intelligent, microprocessor-controlled module that
communicates its status to the system-operator interface.
Each Person Machine Interface is then able to query the
status of the power supply to obtain data regarding
system-charging current, terminal-loading information,
ground-fault conditions and more.
PSX-12 → Power Supply Extender
PSX-12 Power Supply Extender
The Power Supply Extender (Model PSX-12) is a high-current,
auxiliary power supply that expands the main Model PSC-12
power supply and battery charger of the FireFinder XLS
system with an additional 24VDC power. Model PSX-12
is rated at 12 Amps.
RPM → Remote Printer Module
RPM Remote Printer Module
The Remote Printer Module (Model RPM) provides a
means of connecting the FireFinder XLS system to a
printer, such as Model PAL-1, for creating a hard copy of
system status and configuration reports. Concurrently,
Model RPM provides an output port that can be
configured to communicate with external systems.
PTB → Power Termination Board
PTB Power Termination Board
Model PSC-12 comes packaged with a module called the
Power Termination Board (Model PTB). Model PTB is
required for operation with Model PSC-12. Model PTB
filters the power from the incoming AC mains, and
distributes it to the Model PSC-12 power supply and the
optional Model PSX-12 power-supply extender.
Model PTB has an optional connector that can be used
during system installation, commissioning and service to
provide the technician with a place to plug in their laptop
PC, if required. Model AC-ADPT is an optional accessory
cable that allows connection on one side to Model PTB, via
a keyed connector and on the other end directly into to the
laptop's transformer.
Most laptop-computer external power transformers have
removable AC power cords, which can be replaced by the
optional Model AC-ADPT to temporarily provide an AC
power source for laptop-PC usage during system
installation, service and maintenance calls when needed.
SNU-ASSY → Single-Node Upload (SNU) Module
SNU-ASSY Single-Node Upload (SNU) Module
The Single-Node Upload (SNU) is an optional system
module that provides a solution for uploading /
downloading XLS / XLSV configuration data remotely. SNU
can easily transmit data from a PC running the Zeus
custom-configuration tool to a maximum 64 Person
Machine Interfaces.
Each SNU module has three (3) connections: Power,
Ethernet and USB. The data transported between the Zeus
tool and SNU is made through a direct 128-bit, Secure
Sockets Layer (SSL) connection.