Data Sheet for Product

s Industry, Inc.
Building Technologies Division
–8–
FireFinder XLS Components ─ (cont.’d)
CAB2 → Two-Row Enclosure
CAB2 Two-Row Enclosure
The Two-Row Enclosure (Model CAB2) is the mid-sized
FireFinder XLS enclosure capable of housing up to two
(2) Model CAB-MP cabinet mounting plates. The inner
door has two (2) rows of four (4) mounting slots.
The outer door has space for mounting two (2) outer door
plates (Models OD-LP, OD-BP or OD-GP), and can be
configured to open from either side. Model CAB2 consists
of the black Model CAB2-BB back box, the Model CAB2-BD
black inner and outer door package, and one (1) Model OD-
LP lens plate. The outer door has a single lock and key set
installed. A red version (Model CAB2R) is also available, and
a CAB2- RB back box is used with Model CAB2R.
Approximate size is 45” (114.3cm.) high, 26” (66cm.)
wide, and 8” (20.3cm.) deep.
CAB3 → Three-Row Enclosure
CAB3 Three-Row Enclosure
Model CAB3, the single largest FireFinder XLS
enclosure available, can house a maximum three (3)
Model CAB-MP cabinet mounting plates in the enclosure,
and three (3) rows of inner-door mounting slots.
The outer door can be configured to open from either
side. Model CAB3 consists of the Model CAB3-BB back
box, the Model CAB3-BD black inner and outer door
package, and one (1) Model OD-LP lens plate. The outer
door has two (2) locks and key sets installed. A red
version (Model CAB3R) is also available.
Approximate size is 63” (160cm.) high, 26” (66.4cm.)
wide, and 8” (20.3cm.) deep.
CAB-MP → Cabinet Mounting Plate
CAB-MP Cabinet Mounting Plate
The Model CAB-MP cabinet mounting plate provides
mounting for a single row of modules in a FireFinder
XLS cabinet. Four (4) module spaces are available on
Model CAB-MP, which is used to mount the Model CC-5
card cage; the Model CC-2 card cage; the Model PSC-12
power supply; the Model PSX-12 power-supply extender,
and the Model ZAM-80 / 180-zone amplifiers.
Enclosure Trim Kits
Trim kits are available for all system enclosures for semi-
flush mounting applications. Model CAB1-TK (for black
enclosures) and the Model CAB1R-TK (for red enclosures)
fit inside the Models CAB1 and CAB1-R enclosures.
Similarly, Models CAB2-TK and CAB-2R-TK fit inside the
Model CAB2 enclosure, while Models CAB3-TK and CAB3R-
TK fit the Model CAB-3 enclosure.
Remote Transponders
The FireFinder XLS system can use remote transponders
for mounting additional modules such as amplifiers
without requiring a Person Machine Interface or any
control switches. Special doors are available for systems
using Model CAB-2 or Model CAB-3 remote transponders.
These doors (Models CAB2-XBD and CAB3-XBD) omit the
unused inner door, and come complete with ventilation
louvers built into the door.
Model CAB2-XBD fits into Model CAB2-BB, and Model CAB3-
XBD fits into Model CAB3-BB. Model CAB2-XBD and CAB3-
XBD are supplied in black. Red versions (Models CAB2-XRD
and CAB3-XRD) are also available.
ID-MP → Inner Door Mounting Plate
ID-MP Inner Door Mounting Plate
The inner door mounting plate (Model ID-MP) is mounted
on the inner door of any given model CAB enclosure.
Model ID-MP plates are used to mount switch-control
modules (Model SCM-8); LED control modules (Model
LCM-8), or fan-control modules (Model FCM-6).
Four (4) mounting plates are included with each order of
Model ID-MP. Each mounting plate has four (4) spaces for
control modules, and can hold either four (4) Model SCM-
8 modules (one [1] control module space for each
module); four (4) LCM-8 (one [1]control module space
for each module), or two (2) Model FCM-6 modules (two
[2] module spaces for each module).