Data Sheet for Product

s Industry, Inc.
Building Technologies Division
–9–
FireFinder XLS Components ─ (cont.’d)
ID-MP Inner Door Mounting Plate
Combinations are also allowed. Blank spaces in Model ID-
MP can be covered using the blank-control-module
plate (Model BCM). Up to four (4) modules can be
mounted in a single row on the inner door.
ID-SP → Inner Door Blank Single Plate
ID-SP Inner Door, Blank Single Plate
The inner door, blank single plate (Model ID-SP) is used
to cover any single-module blank spaces within the inner
door where no Person Machine Interface or Model ID-MP
is being used. Up to four (4) Model ID-SP modules can be
mounted in a single row on the inner door. Two (2)
blank plates are included with each order of Model ID-SP.
BCM → Blank Control Module Plate
BCM Blank Control-Module Plate
Model BCM plates can be mounted on a single ID-MP.
Four (4) blank module plates are included with each
order of Model BCM.
OD-LP → Outer Door Lens Plate
OD-LP Outer Door Lens Plate
The Outer Door Lens Plate (Model OD-LP) is a clear plastic
lens plate mounted on the outer door of a system
cabinet. Model OD-LP is used to allow operators to see
the system interface and controls mounted on the inner
door, but restricts access to unauthorized users. The plate
covers an entire row on the outer door. A single lens
plate is included with each order of Model OD-LP.
OD-BP → Outer Door Blank Plate
OD-BP Outer Door Blank Plate
The Outer Door Blank Plate (Model OD-BP) entirely
covers an unused row of a XLS system cabinet, and is
mounted on the outer door. One (1) blank plate is
included with each order of Model OD-BP.
OD-GP → Outer Door Grill Plate
OD-GP Outer Door Grill Plate
The Outer Door Grill Plate (Model OD-GP) also covers an
entire row on the outer door of a system cabinet, but has
four (4) rows of ventilation louvers on it. Model OD-GP is
mounted in front of system bulk amplifiers, card
amplifiers, or other modules that generate heat. Using
Model OD-GP will permit airflow across these modules to
aid in heat dissipation. One (1) grill plate is included
with each order of Model OG-GP.
Remote System Enclosures
Models REMBOX2 and REMBOX4 are FireFinder XLS
system enclosures that are used for remotely mounting
inner-door modules, such as: Person Machine Interfaces;
switch modules (Model SCM series); Live Voice Modules
(Model LVM), and Firefighters’ Master Telephone (Model
FMT) modules.
Models REMBOX2 and REMBOX4 are thinner than regular
Model CAB-series of enclosures – just 5” (12.7cm.) deep
overall, and are perfect for mounting in limited-space areas
(e.g. – office-complex lobbies or behind a receptionist’s
desk).
No card cages, power supplies or bulk amplifiers can be
mounted in a given Model REMBOX-series enclosure due
to their smaller depth. However, Person Machine
Interfaces and some modules (e.g. – the remote network
interface module [Model RNI]; the output control module
[Model OCM-16], and the supervised input module
[Model SIM-16]) can be mounted in a given Model
REMBOX-series enclosure.
Due to the depth of Models LVM and FMT, no Model OCM-
16 or Model SIM-16 modules can be used simultaneously
with Model LVM or Model FMT. Model REMBOX2 and
Model REMBOX4 are designed for flush mounting with no
trim kit required. Both enclosures also come with a clear
lens plate on the cover.