User Manual

ManualsBrandsSiemens ManualsBurner EquipmentAnalog Input Modules AGA56...

CC1N7922en

20.04.2016

Building Technologies Division

922

Analog Input Modules

AGA56...

Analog input modules for the control of SQM5... air damper actuators by contin-

uous analog control signals, such as 4...20 mA, and continuous analog position

feedback signals.

For supplementary Data Sheets, refer to SQM5... Data Sheet N7815 and ASZ...

Data Sheet N7921.

AGA56... and this Data Sheet are intended for use by OEMs which integrate the

modules in their products!

Use

The AGA56... are auxiliary modules for use with the SQM5... air damper actuators.

They can be integrated into the SQM5... on site, or are supplied with the actuator,

ready built in.

Summary of content (11 pages)

PAGE 1
7 Analog Input Modules 922 AGA56... Analog input modules for the control of SQM5... air damper actuators by continuous analog control signals, such as 4...20 mA, and continuous analog position feedback signals. For supplementary Data Sheets, refer to SQM5... Data Sheet N7815 and ASZ... Data Sheet N7921. AGA56... and this Data Sheet are intended for use by OEMs which integrate the modules in their products! Use The AGA56... are auxiliary modules for use with the SQM5... air damper actuators.
PAGE 2
Warning notes To avoid injury to persons, damage to property or the environment, the following warning notes should be observed! Do not make any modifications to the modules!      All activities (mounting, installation and service work, etc.
PAGE 3
Type summary (other types of modules on request) Functions Manual control Adjustment of control range Manual control Adjustment of control range Linearization of angle of rotation Readjustment of control signal Presetting of fixed position Manual control Control inputs --- Position feedback signal --- 4...20 mA Operating voltage (50...60 Hz) AC 24...240 V --- Type reference AGA56.1A97 Identification letter ¹) A AC 100...110 V AC 220...240 V AC 24 V AC 100...110V AC 220...240 V AC 24 V AGA56.
PAGE 4
Technical data General data Type reference - ...A27 - ...A17 - ...A87 - ...A97 Frequency Degree of protection Safety class - AGA56...A17, ...A27 - AGA56...A87 Input resistance - Current input - Voltage input Power consumption Vibrations Vibration range Perm. input line lengths Temperature drift of output signals Operating voltage AC 220 V –15 %...AC 240 V +10 % AC 100 V –15 %...AC 110 V +10 % AC 24 V –15 % / +10 % AC 24 V –5 %... AC 240 V +10 % 50...60 Hz ±6 % IP 54 to IEC 529, when mounted in the SQM5...
PAGE 5
Function The following functions are provided: Manual control Adjustment of the control range Linearization of the angle of rotation Readjustment of the control signal Presetting the fixed position (For availability, refer to «Type summary / Functions») Manual control After operating the «MAN./AUTO.» switch and changing from «AUTO» to «MAN», the actuator can be opened or closed with the «▲/0/▼» toggle switch.
PAGE 6
Function (cont´d) Readjustment of the control signal The control signal can be readjusted using the external «ZF» signal (4...20 mA). M Legend M Air damper actuator REG Adjustment of the control range SHIFT Readjustment of the control signal Y0...
PAGE 7
Function (cont´d) Presetting the fixed position Using potentiometer «POS», the actuator’s angular position can be preset. This position is approached independent of control signals when operating voltage is present at the input of «POS» (Terminal «P»). Position «POS» can be adjusted within the entire range of angular rotation.
PAGE 8
Assignment of terminals Safety extra lowvoltage terminals U4 M Y0 Y1 Y2 Y3 M ZF M U1 U2 U3 L1 P L N A Z ZL Screw terminals for singlewire cables up to 2.5 mm² (AWG12) 7922a01/0699 AGA56.9... Operating voltage terminals AGA56.41... Y+ ZL N 13 LR A Z L ZL N 13 LR A Z L ZL N 13 LR A Z L 7922a04/0699 Y- Y M Y M U 7922a02/0699 AGA56.42... 7922a05/0699 AGA56.43...
PAGE 9
Internal diagrams and connection diagrams  AGA56.1A97 Manual control L Z AGA56.1A97 SW2 2 13 2 13 1 11 21 12 22 13 13 ~ 1 2 ~ ~ 1 3 23 2 13 1 11 2 13 1 21 M 12   3 23 M SQM5... AGA56.4... 22 13 ~ 7922z01/0699 SW1 A SQM5... Manual control Adjustment of the control range ...A87 : DC 24 V / 50...60 Hz ...A27 : AC 220...240 V / 50...60 Hz ...A17 : AC 100...110 V / 50...60 Hz L AGA56.42... DC 0...2 V (135....1 k) Y M U DC 2 V AGA56.43... (DC 0...
PAGE 10
Internal diagrams and connection diagrams (cont´d)      AGA56.9... Manual control Adjustment of the control range «REG» Readjustment of the control signal «SHIFT» Linearization of the angle of rotation «LIN» Presetting the fixed position «POS» ...A87 : DC 24 V / 50...60 Hz ...A27 : AC 220...240 V / 50...60 Hz ...A17 : AC 100...110 V / 50...60 Hz L L G (24 V) L ZF 4...
PAGE 11
Former Executions Please note L G (24 V) Z L G (24 V) SW1 SW1 N Go (24 V) Z 13 ZL A LR 7922z04/0999 A LR L N Go (24 V) 7922z06/0999 L AGA56.41... AGA56.42... AGA56.43... Current execution   Executions supplied until end of 1999 SW2 b a 2 13 3 1 13 12 22 13 23 21 c b a 3 N 2 13 3 1 2 13 3 2 3 1 (1000  ) bb a b c M ca 1 ASZ... a c N 51 SQM5... ~ 11 13 12 22 13 23 21 a c ~ ~ ~ ~ ~ ~ 11 2 ~ (1000  ) a b c 2 13 3 1 ~ 1 ASZ...