User Manual

ManualsBrandsSiemens ManualsBall valves (BC0)6-port control ball-valve VWG41.20..

EPD - Type II

Based on ISO 14021

VWG41.20-xxx-xxx 6-way ball valve with calibrated washer

ALN15.152B 2 male threaded tail pieces G1/2" ISO 228 and 2 gaskets

ALN15.202B 2 male threaded tail pieces G3/4" ISO 228 and 2 gaskets

ALG15.152B 2 female threaded tail pieces Rp1/2" ISO 7-1 and 2 gaskets

ALG15.202B 2 female threaded tail pieces Rp3/4" ISO 7-1 and 2 gaskets

ALG15.252B 2 female threaded tail pieces Rp1" ISO 7-1 and 2 gaskets

ALI20VWG41 1 Insulation box for 6-way ball valve

Siemens Schweiz AG

Building Technologies Division

Gubelstrasse 22

CH-6301 Zug

Management System since by

ISO 9001 22.07.1986 SQS

ISO 14001 20.10.1998 SQS

Process control

Product

Environmental

Product Declaration

Type of equipment /

Product No.

OHSAS 18001 01.01.2011 SQS

Maintenance

Fire load 1MJ

20-PAP Corrugated fiber board Box variant

20-PAP Corrugated fiber board Interior fitment for valve box variant

4-LDPE Plastic bag variant

Notes on disposal

Total weight of device 25 … 1.779g

The total weight of a device may deviate from the total of the weights of all individual components due to rounding.

EPDM; halogen-free O-rings variant

PTFE; halogenated Ball gaskets variant

PTFE; halogenated Antifriction discs variant

PE; halogen-free Data-tag variant

PPE; halogen-free Insulation box variant

EPDM; halogen-free Gasket variant

PA66; GF 30%; halogen-free Actuator adater variant

CuZnPb Valve body variant

Materials

Packaging

Environmentally compatible

product design

Product responsibility of Siemens covers the entire product life cycle. Siemens already assesses, avoids and minimizes

the environmental impact of its products with respect to production, procurement, sales, use, services and disposal during

the product and process planning phases by complying with Siemens EP Standard No. 1 (former SN 36350)

"Specifications on Environmentally Compatible Product and System Design".

Metals

Plastics

One-way, recyclable

Not necessary

25-November-2015

A6V10757071a_en Page 1/3

Summary of content (3 pages)

PAGE 1
EPD - Type II Based on ISO 14021 Environmental Product Declaration Product Process control Type of equipment / Product No. VWG41.20-xxx-xxx 6-way ball valve with calibrated washer ALN15.152B 2 male threaded tail pieces G1/2" ISO 228 and 2 gaskets ALN15.202B 2 male threaded tail pieces G3/4" ISO 228 and 2 gaskets ALG15.152B 2 female threaded tail pieces Rp1/2" ISO 7-1 and 2 gaskets ALG15.202B 2 female threaded tail pieces Rp3/4" ISO 7-1 and 2 gaskets ALG15.
PAGE 2
EPD - Type II Based on ISO 14021 CuZnPb; Chrome plated Valve balls variant Steel stainless Valve stems variant Steel stainless Seeger ring for upper stem variant Steel stainless Screws for adapter variant Steel stainless Ring for upper stem variant Steel stainless Calibrated washer variant Steel stainless Circlip for calibrated washer variant CuZnPb Neutral nut variant CuZnPb Tail piece variant Steel stainless Ring variant O-rings 5 Ball gaskets 4 Antifriction discs 1 Dat
PAGE 3
EPD - Type II Based on ISO 14021 Regulation (EC) No. 1907/2006 (REACH) To the best of our knowledge and according to the information of our suppliers the above mentioned device and its packaging contain no substances of the candidate list according to Article 59 (1, 10) of the regulation (EC) No. 1907/2006 concerning the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH) in concentrations above 0.1 % w/w. (Status according to the creation date of this document.