Cordless Telephone Model Number: C2

19
Handset settings
Gigaset C2 / englisch / A31008-C002-B001-2-QD19 / tel_direct_hands_sett.fm / 28.03.2003
Setting the Walk and Talk mode
The Walk and Talk function allows two C 2 handsets (maximum range 300 metres) to
call each other no matter how far they are from the base.
Precondition:
◆ Both handsets have been registered to the same base or
◆ Both handsets are registered to different bases and both are set to Best Base
(page 8) or
◆ One of the handsets is not registered to any base and the registered handset is set
to Best Base or
◆ Neither handset is registered to a base.
Activating/deactivating the Walk and Talk mode
MENU; s Additional Features OK; s Walk and Talk OK.
To deactivate: MENU;
s Walk and Talk Off OK.
Ring and advisory tones are set in exactly the same way as if your handsets at home
were in range of the base (page 20 and page 21).
'Activate/deactivate ringer' (page 20) and 'Activate/deactivate keypad lock' (page 9) are
available in the Walk and Talk mode.
Handset settings
Your handset is preset. You can change the settings to suit your requirements.
Activating/deactivating Auto Answer
With this function you simply lift the handset out of its charging shell when a call arrives
- there is no need to press
c (the default is On).
MENU; s Handset Settings OK; Auto Answer OK (‰ = On);
press
a and hold (return to idle status).
i
In Walk and Talk mode
◆ The handsets cannot be reached by incoming calls,
◆ Handset operating times are severely curtailed.
i
The Walk and Talk mode is retained even when you switch your handset
off and back on.