Instruction manual

CENTRA S, S VC, and Life BTEs 25
1. Using the fingernail of your thumb or index
finger, open the battery compartment door to
the first catch.
2. Using your fingernail, lift up the audio input
flap, exposing the gold contacts.
3. Close the battery compartment door.
4. Place the gold contacts of the audio shoe on
the gold contacts under the audio input flap
on the CENTRA BTE. Gently push the audio
shoe into place by pressing the audio shoe
toward the underside of the hearing
instrument until it snaps into place.
5. To remove the audio shoe, hold the BTE with
one hand and the audio shoe with the other
hand. Gently pull the audio shoe off, guiding it
from the underside towards the gold
contacts. Close the audio input flap.
Note: When controlling CENTRA BTE instruments with an
audio shoe attached to one or both hearing
instruments, the memory button on the ePocket or on
the instruments will not change programs. It can be
programmed to select the audio mode only (audio
input only, microphone only, or mixed mode). The
volume can be changed using the ePocket.