User's Manual

Appendix
127
The following appears
immediately after the
Talk key is pressed:
Connect.
No dial tone available;
no calls can be made.
Communication sys-
tem is being used by
other users.
Repeat call later.
The following,
forexample, appears:
Base 1
Outgoing and incom-
ing calls and activation/
deactivation are not
possible.
Handset is blocked. Remove the battery pack
from the handset and
then re-insert it. Pro-
ceed as when loading
batteries for first time
(Æ Page 18).
The following appears:
Time exceeded
Maximum input time
was exceeded.
Avoid long pauses
between keystrokes.
The On-hook key was
not pressed.
Press the On-hook key.
The following appears:
Please try later
The communication
system is overloaded.
Wait and try again later.
The following appears:
Currently not acces-
sible
Function is currently
not available.
Wait and try again later.
No connection availa-
ble under the phone
number dialled.
Enter the phone number
correctly or call the
attendant console.
The following appears:
Not possible
or:
Incorrect input
or:
Nothing stored
Speed dial number not
available, appointment
entered incorrectly,
entry blocked or not
allowed, prerequisite
not fulfilled
(forexample, if there is
no second partner for
toggling), number
dialled was incomplete.
Correct your input,
select a permitted
option, enter the phone
number in full.
The following appears:
Not authorized
Blocked function was
called.
Apply to the relevant
service personnel for the
COS for the blocked
function.
The following appears:
Not allowed
Incorrect PIN was
entered.
Enter the correct PIN.
Error Possible cause Remedy