User's Manual

Putting the handset into service

2. Opening the battery compartment

Insert a screwdriver into the groove between battery cover and the jack (1),

grip the cover firmly and lift it off the battery compartment (2).

3. Inserting the battery pack

Insert the battery pack nose first and at an angle (3). Then press it down

into the compartment until the battery pack’s positioning clip firmly snaps

into place (4).

4. Closing the battery compartment

Position the battery cover over the compartment’s catches so that they can

snap into place (5). Then press the battery cover down until it snaps into

place (6).

Note:

To remove the battery pack, you must first press the lateral posi-

tioning clip.