User's Manual

Conducting calls – enhanced functions

Step by Step

Activating control relays

The service engineer can set up a maximum of 4 control

relays that enable various equipment (forexample, door

opener) to be activated and deactivated.

It is possible to access a specific control relay. Depend-

ing on the configuration, the control relays can be

• activated and deactivated automatically, or

• activated and deactivated automatically on the basis

of a timer.

Prerequisite: The service engineer has set up at least

one switch.

This function can also be called by entering the code

(Æ Page 122).

Activating a control relay

c or d Press and hold down the Talk key or press the Speaker-

phone key.

Call the system menu.

> < [ Select the menu item and confirm.

> < [Select the menu item and confirm.

o Follow the user guidance system from this point on-

wards. Enter the required switch code (1... 4).

a Press the On-hook key to end the operation.

Deactivating a control relay

c or d Press and hold down the Talk key or press the Speaker-

phone key.

Call the system menu.

> < [Select the menu item and confirm.

o Follow the user guidance system from this point on-

wards. Enter the required switch code (1... 4).

a Press the On-hook key to end the operation.

Service?

90=Control Relay

On?

Service?

#90=Control Relay

Off?