user manual

Setting Up the Telephone

Gigaset 4015 Comfort, USA, A31008-G4015-B102-2-7619

vorberei.fm

25.06.03

Operating the Handset

Inserting the Batteries

● Insert the batteries, as shown above.

● Place cover and push gently upward until it clicks into place (the unit

is shipped with the battery cover off).

● To open, press the grooved area on the cover and slide back.

Placing Handset into the Base Station and Charging the

Batteries

Turn the handset off by holding down the END key then place it in the

base station with the display facing upward toward you. After about

one minute, the handset's internal number will appear on the display

(for example“INT 1”). Successful registration is signaled by a confir-

mation beep (crescendo tone sequence).

The display is protected by a plastic film.

Remove the protective plastic film!

● Use only “AA” rechargeable NiCd or NiMH batteries. Do not

use Alkaline, Lithium or non-rechargeable batteries.

● Never use non-Siemens charging units as these can damage

the batteries.

IMPORTANT! Before using your handset, you must register it

first.

For information on how to register additional handsets (bought

separately), see page 56.

–