User Manual

84
Fire & Security Products
Siemens Building Technologies Group
1964_a_en_--.doc
07.2001
6 Examples
The following examples show typical events and how they are processed.
6.1 Alarms
6.1.1 Local alarm in DAY mode
Assumptions: CC11 with DMS address 111, organization DAY MODE, Operation be-
fore expiration CAC
CC11 Telegram Management system
Detector generates danger level = 2
(Pre-alarm state)
W1110B33U033A
W1110B6BQ674F
(Warning)
(Element active)
(Command acknowledgment warn-
ing)
W1110B33R0389
Warning is acknowledged by operator
‘Warning’ state is acknowledged
W1110B33Q033A
Detector generates danger level = 3
(Alarm-State). CAC-V1 starts.
W1110B33N033B
W1110B33U0101
W1110B30Q0101
W111A1CDQ0500
W1110279U7A4F
(Warning end)
(Autom. detector alarm)
(Collective alarm, Section)
(Local alarm area 1)
(Internal horn Active)
(Command acknowledgment alarm)
W1110B33R0180
Alarm is acknowledged by the operator (before
expiration of CAC V1).
‘Alarm’ state is acknowledged.
CAC-V1 stops, CAC-V2 starts.
W1110B33Q0101
W1110279Q7A4F
W1110279N7A4D
(Alarm acknowledged)
(Internal horn acknowledged)
(Internal horn inactive)
Cause of alarm is being investigated and reme-
died.
(Command reset alarm)
W1110B33R0183
Alarm is reset by operator (before expiration of
CAC-V2).
Alarm reset. Detector and zone in
normal state, CAC-V2 stops.
W1110B33N0185
W1110B30Q0185
W111A1CDQ0585
W1110B33N643C
W1110B6BN673C
(Alarm reset)
(Collective section alarm reset)
(Local alarm area 1 reset)
(Zone normal)
(detection device normal)