DMS8000 Graphical Map Configuration For: - MM8000 Management Station MP4.15 - MT8001 Management Terminal MP4.
Data and design subject to change without notice. / Supply subject to availability. © 2008 Copyright by Siemens Switzerland Ltd We reserve all rights in this document and in the subject thereof.
1 Introduction ............................................................................................. 6 2 Configuring graphical maps – using the MapMaker ........................... 8 2.1 General concepts ...................................................................................... 9 2.2 DMS8000 maps – general procedure ..................................................... 10 2.3 Guide to map configuration ..................................................................... 12 2.3.
Introduction About this document Purpose This manual is a guide to the configuration of graphical maps for MM8000 management stations and MT8001 management terminals. This guide is to be used in conjunction with the product-specific Danger Management System (DMS) Installation, Configuration, and Commissioning guide (MM8000 / MT8001), and the DMS8000 Connectivity Guides when configuring a DMS. See also… Graphical Map Configuration Quick Reference (STEP #A6V10069550).
Introduction 2. Select “All” in the Documents section of the Quick Search page and select “Advanced Search”. 3. Enter the document number in the “Brochure No.” field (A6V10089056) and press “Enter”. Liability disclaimer for damage or injuries Before products are delivered, they are tested to ensure they function correctly when used properly. Siemens disclaims all liability for damage or injuries caused by the incorrect application of the instructions, or the disregard of danger advisories.
Introduction 1 Introduction MM8000 / MT8001 can handle large maps representing entire building floors with as many dynamic points as required. MM8000 users navigate maps with zooming and panning controls. You can organise maps in multiple layers, which can be background or foreground layers. At least one background and one foreground layer are present in any map. Note: Zooming feature not available for MT8001 terminals. Map layers contain graphical objects, which own a number of properties.
Introduction points and pages can be provided automatically by MM8000 / MT8001 tools and/or left to a manual setting. Fig. 2 A page is a partial view on a map‟s depth 7 Siemens Building Technologies Fire & Security Products 048_DMS_DMS8000_Graphical_Map_Configuration_MP4.15_A6V10062441_a_en.doc 06.
Configuring graphical maps – using the MapMaker 2 Configuring graphical maps – using the MapMaker Tools for creating and modifying maps are contained in toolbars surrounding the work area. You can choose to hide them if you wish (View → Toolbars). The default is shown below. Fig. 3 MapMaker user interface To create a new map, follow the general procedure detailed in section 2.2, p. 10.
Configuring graphical maps – using the MapMaker 2.1 General concepts Before starting the graphic configuration for MM8000 / MT8001, you need to become familiar with the following general concepts: Large maps can be handled by MM8000 / MT8001, representing an entire building floor with dynamic points. MM8000 users can navigate maps with zooming and panning controls. Maps are organised in multiple layers, which can be one or more background and foreground layers.
Configuring graphical maps – using the MapMaker 2.2 DMS8000 maps – general procedure In the Composer project, Maps are located in „Supervisor System Settings MM8000 / MT8001 System Logical Configuration Graphic Maps‟. Note: Add folders and sub-folders to organise a large number of maps. When editing a map, a graphic editor containing all the required tools is launched. For details on using the graphical editor, see section 2.3.12 on page 34.
Configuring graphical maps – using the MapMaker Automatic association of maps to the points: A point on a map is automatically associated to that graphical map. In other words, it is associated to the page created with the map‟s depth that contains the point.
Configuring graphical maps – using the MapMaker 2.3 Guide to map configuration This section contains details on how to perform each step when configuring a map. 2.3.1 For details on the tools available in MapMaker‟s graphical editor, see section 2.3.12, p. 34. Creating a new map 1. Select „Supervisor System Settings Configuration Maps‟. MM8000 / MT8001 System Logical 2. Select the map icon from the procedure icons to the left of the Composer tree. A map node appears in the tree. 3.
Configuring graphical maps – using the MapMaker 2.3.2 Configuring a background layer 2.3.2.1 Using import tools A background layer is typically prepared by importing an external file such as: – AutoCAD files (DWG, DXF, SHP). – Windows Metafiles (WMF, EMF). – Bitmap files (BMP, JPG, PCX). Simply select the appropriate icon from the toolbar. Insert Bitmap file Insert Windows metafile Insert AutoCAD drawing Fig.
Configuring graphical maps – using the MapMaker 2.3.3 Defining foreground layers Define one foreground layer Before inserting MM8000 / MT8001 points in a map, you need to create at least one foreground layer and then define a depth for it. Note that: Layers can be de-activated if not yet ready to be seen by the operators. The Background checkbox of the foreground layers should be unchecked. Layers may have a discipline and category type associated for dynamic filtering.
Configuring graphical maps – using the MapMaker Layers parameters: Active checkbox – Select to show a layer during runtime / de-select to hide a layer. Visible checkbox – Select to show a layer during configuration / de-select to hide a layer. Background checkbox – Select if a layer is a background layer. Discipline Type – Specify a discipline to assign to a layer to filter what can be seen when activity occurs.
Configuring graphical maps – using the MapMaker Note: You have one button to create a new depth, and another to open the depth window where you can also add (as well as delete) a depth (see Fig. 7). Try to use the first command because it allows you to automatically set the zoom factor. The second command requires you to define the zoom factor as a numeric range (in pixel or metric unit). 3. Deselect any background layers you don‟t want associated to the depth. 4. Select the associated foreground layers.
Configuring graphical maps – using the MapMaker 2.3.5 Configuring the foreground Once you have defined your foreground layers and depths, you need to configure the foreground layers by dragging the points from Composer tree into the appropriate graphical maps. The MapMaker graphic tool provides a command for a quick arrangement of the screen for optimal operations with MM8000 /MT8001 points. To configure a foreground layer, do the following: 1.
Configuring graphical maps – using the MapMaker When you close the graphical map editor (saving your work), the points you deposited on the map are indicated in the tree by a green square next to the node. View options: snap grid and image placeholders If you wish to align the objects on a grid, set the option in View Options. There you can also enable the image placeholder option, mostly used to speed up operations in case of slow graphic display.
Configuring graphical maps – using the MapMaker 2.3.6 Defining camera views The graphic tool provides commands to define the area covered by a camera view. At runtime, this allows for the association of the points located within that area to the camera images. Note: This functionality is not available for the MT8001 Management Terminal. To define a camera view, do the following: Note: Before proceeding, ensure that you have already configured the map background and foreground, including camera points. 1.
Configuring graphical maps – using the MapMaker A B Fig. 12 A B Area controls Select the interior squared dot to move and rotate the entire polygon Select the peripheral squared dots to reshape the polygon 5. Right-click once more on the camera point. 6. Select „Hide coverage area‟ in the menu that appears. Note: If you need to modify the area, show it again and repeat this procedure. 7. Repeat steps 1-6 for all cameras.
Configuring graphical maps – using the MapMaker 2.3.6.1 Manually associating video cameras Video cameras are automatically assigned to points according to the coverage area defined for the camera points allocated on the map. However, a manual assignment can replace or be added to the automatic association. Note: This functionality is not available for the MT8001 Management Terminal. First, select the point node in the tree. Then, in the Camera Extensor tab (Fig.
Configuring graphical maps – using the MapMaker 2.3.7 Modifying graphic object properties Each point or object you deposit on a map has a set of properties. You can modify these properties to suit your needs by opening the Graphic Object Property window. To modify an object‟s properties, double-click on it. Note: The „View Object Properties‟ command is also available in the right-click menu of a selected object. The Graphic Object Property window displays (see the following figure). Fig.
Configuring graphical maps – using the MapMaker The following list defines the tabs in the Graphic Object Property window. The exact property window name and property list varies depending on the type of object you select. The global list includes: Note: Any changes you make are automatically saved when you close the window. – Name: The technical information (for debugging purposes) for the object. – Position: The position of the object on the map in X, Y coordinates. Useful for fine position adjustments.
Configuring graphical maps – using the MapMaker Additionally, you can select font properties such as type, style, etc. You can also change the icon settings. You change these by selecting the „Icon Settings‟ button to display the Icon Settings window (see Fig. 16). The „Display type‟ setting you choose will affect what the operator sees during runtime.
Configuring graphical maps – using the MapMaker 2.3.7.1 Changing an imported AutoCAD file You can change an AutoCAD file by doing the following: 1. Select the CAD object on the map. Note: You may need to zoom out to do this. 2. Right-click to display the CAD Property window. 3. Select the „File name‟ tab. 4. Select the browse icon to open the browsing window. 5. Select the new CAD file and then select „Open‟.
Configuring graphical maps – using the MapMaker 2.3.7.2 Changing an object to a graphic command Choose this function if you want an object to be a button to allow an operator to send commands. Note: To have an object represented on a map as both a button and an icon, drag the same data point twice onto the map, and change one of the icons to a graphic command button. To access this function, select an object, and then in the right-click menu, select „Change to Graphic Command‟.
Configuring graphical maps – using the MapMaker Fig. 19 Example of graphic command button on a map To modify a button, double-click on it to open the Graphic Object Property win- dow. To change a button back to a graphic point, select it and in the right-click menu, select „Change to Graphic Point‟. 27 Siemens Building Technologies Fire & Security Products 048_DMS_DMS8000_Graphical_Map_Configuration_MP4.15_A6V10062441_a_en.doc 06.
Configuring graphical maps – using the MapMaker 2.3.8 Creating manual pages In addition to the automatic association described in section 2.3.9, you can also create your own pages and then associate them manually to the individual points. The buttons illustrated in the figure below provide the tools for creating and managing a list of pages. AB C Fig.
Configuring graphical maps – using the MapMaker To edit or delete pages, do the following: Click the Open list icon to display the list of configured pages. (See “E” in Fig. 20.) The Pages window appears. Fig. 22 Edit/delete pages in the Pages window 2.3.8.1 Associating a manual page to a data point – MM8000 Once manual pages are defined, you should associate them to points. In the „Event Treatment‟ and „Plant Browser‟ tabs (Fig.
Configuring graphical maps – using the MapMaker To associate a page to a data point, do the following: 1. Select the desired point node in the tree. 2. Select the „Event Treatment‟ tab. Note: To associate the page to the point in the Plant Browser, select the „Plant Browser‟ tab. 3. Select the manual page in the „Preset pages‟ pane. 4. Select the assign icon . B C D A Fig.
Configuring graphical maps – using the MapMaker 2.3.8.2 Associating a manual page to a data point – MT8001 If you have created one or more pages for a point on a map, you can choose to have a specific page or an entire map displayed during event treatment for that point. To do this, proceed as follows: 1. Select the desired point node in the tree (it must already be deposited on a map). 2. Select the „Pages‟ tab. The map and any pages you created for it display in the ‘Maps/Pages’ pane. 3.
Configuring graphical maps – using the MapMaker 2.3.9 Saving a map There are two ways to save a map: a. Use the menu command File Save (or the shortcut CTRL-S) b. Exit MapMaker by closing the window (you will be given the option to save) Option “a” allows you to periodically save a map while continuing to work on the configuration. To return to a map to continue editing (if you selected option “b”), select the map node in the tree, and click the „Edit Map‟ button in the Node tab page.
Configuring graphical maps – using the MapMaker 2.3.11 Creating a default map page You can also define a default page so that a graphic or text will appear for all data points that have no map associated with them. Note: This feature not available for MT8001. Only a manual page can be used as a default page. Proceed as follows: 1. Create a manual page to use as the default page (if you don‟t already have one). .See section 2.3.8 for details on how to do this. 2.
Configuring graphical maps – using the MapMaker 2.3.12 Using the graphical editor The graphical editor contains a number of tools to use when creating maps. This section describes the editing tools to enable you to create maps more efficiently and/or to customise them. 2.3.12.1 Using drawing tools Standard graphic tools are available, as shown in Fig. 28.
Configuring graphical maps – using the MapMaker When an object is selected, it appears covered by a greyed grid, delimited by few black, squared dots (see Fig. 29). Fig. 29 Selected object 2.3.12.2 Using size and positioning tools Adjusting object size and position A number of tools are available for adjusting size and position of objects.
Configuring graphical maps – using the MapMaker 2.3.12.3 Adjusting views Use the following tools to control the map display: A B C D E Fig. 31 A B C D E View tools Move the map (pan) Adjust current view to the screen size Adjust dimension – see tree and map at same time (for drag and drop) See aerial view – a small navigation window for easy orientation Set/unset grid – modify resolution in View → Options Tip: To quickly zoom in and out on a map, click on it and use the mouse wheel. 2.3.
Configuring graphical maps – using the MapMaker Appendix A – Recommendations about AutoCAD® maps For an easy integration of AutoCad maps in MM8000 / MT8001, a number of rules must be taken into account. Prepare the maps with AutoCAD prior to the integration into MM8000 / MT8001. Limit the size of the map Split maps with too large a surface into 2 or more pieces. Limit the number of active symbols (detectors, push-buttons) on the same map to about a maximum of 400 elements.
Configuring graphical maps – using the MapMaker Create an “extents view” From the original plan, make an extents view, exactly as you want it to appear in MM8000 / MT8001. 1. Draw a rectangle on a new layer „MM8000 / MT8001_Extents‟, with the desired drawing size. 2. Perform a „Zoom extents‟ to view the result and note the values of the drawing extents with the command: EXTMIN = reference of the lower left side. EXTMAX = reference of the upper right side. 3.
Siemens Switzerland Ltd Building Technologies Group International Headquarters Fire Safety & Security Products Gubelstrasse 22 CH-6301 Zug Tel +41 41 724 24 24 Fax +41 41 724 35 22 www.sbt.siemens.com Document no. A6V10062441_a_en Edition 06.
