Manualshelf

User Manual

ManualsBrandsSiemens ManualsFire - DMS8000 Network & TerminalsMT8001 MP3.15 Management Terminal Installation Function & Configuration Commissioning Safety Regulations
21222324252627282930
Installation
3
Installation procedure
30
Building Technologies A6V10062407_a_en
Fire Safety & Security Products 30.06.2013
Selecting the Automatic Server Startup and Redundancy
2. Click Next to continue.
Server PC name (Client/FEP station only)
1. If installing a Client or FEP station, enter the network name of the server (Stand-
Alone) station. Note that the IP address is not valid.
2. Click Next to continue.
Software setup
1. Click Install.
Starting the software installation
At this point, the setup copies the file onto the hard disk and performs the
initialisation tasks.