User Manual

Installation
Installation procedure
3
43
Building Technologies
A6V10062407_a_en
Fire Safety & Security Products 30.06.2013
Demo mode
MM8000/NK8000 and MK8000 can operate in demo mode for a limited amount of time.
The following table illustrates the system behaviour.
Composer and system behaviour in relation to the license options.
Missing key
or
invalid/insuf
ficient PAK
Missing key
and no PAK
code
installed
Customer
Key and
PAK
(including
Composer)
Service Key
and PAK
(only the
Service
PAK code
installed)
Service Key
and expired
PAK
Customer
Key and
PAK
(without
Composer)
+ Service
Key and
PAK
Composer Can
Open/Close
/Download/
Backup.
Can also
support
limited
configuratio
n
capabilities
(e.g. for
NK8237).
Can
Open/Close
/Download/
Backup.
Can also
support
limited
configuratio
n
capabilities
(e.g. for
NK8237).
Runs
normally.
Runs
normally.
Can
Open/Close
/Download/
Backup.
Can also
support
limited
configuratio
n
capabilities
(e.g. for
NK8237).
Runs
normally.
Runtime
system
Cannot run. Can run for
2 hours
(demo).
Runs
normally.
Can run for
24 hours.
Cannot run. Runs
normally.
For more information about license management, see section
Managing Composer
License
in the Composer Technical Manual (A6V10062401).
3.4.5 Checking the license requirements
Each MK8000 license supports a limited number of data points (according to what was
purchased). Specifically, the limitation applies to the total number of control units and
devices configured in Composer.
As for the MM8000 license, the MK8000 OPC server license calculation is based on
the static information of the Composer project. More precisely, the license parameters
are:
- Physical subsystems configured
- Physical objects configured for each subsystems
- Network drivers configured and connected to subsystems.
Composer can provide the detailed license requirements for the current configuration.
1. Select the main node of the DMS8000 system, e.g. Project > MK8000 System >
MK8000 and then the Node tab.
2. In the page that appears, click View License Data.