User Manual

Installation
3
Installation procedure
44
Building Technologies A6V10062407_a_en
Fire Safety & Security Products 30.06.2013
 The resulting list shows the required license parameters for the current
configuration.
3. Click Check License Data to verify whether the license and PAK codes currently
loaded can enable the configuration.
 The Available License column will then show Available if the license PAK is
sufficient.
Viewing and checking the MK8000 license
3.4.6 Starting the system for the first time
When a valid PAK code is inserted, the PC can be restarted. If the automatic start-up
has been selected during setup [➙ 26], the MK8000 Server tasks will start
automatically.
Otherwise, you can use the Start Server command available on the
desktop.
In order to check whether your Server is up or not, use the System Monitor (see A4 -
Usi
ng the System Supervisor Browser [➙ 92]).
At this point, you can notice the new MK8000 System Monitor icon in the Windows
taskbar at the bottom right of the screen. Also, while starting up, status messages are
displayed reporting the server task conditions.
MK8000 System Monitor icon