User Manual

Installation
Installation procedure
3
45
Building Technologies
A6V10062407_a_en
Fire Safety & Security Products 30.06.2013
3.4.7 Installing the software on the FEP (Distributed Systems)
When you install MK8000 on a FEP, you need to know the name of the PC where you
want to install the server (Stand-Alone).
To install MK8000 on a FEP station, do the following:
1. Logon as Administrator.
2. Insert the DMS8000 Installation CD.
3. Follow the procedure described in section Software set-up [➙ 26].
4. In the setup menu, select FEP Station.
5. During the setup, insert the name of the PC where the Stand-Alone MK8000 was
installed.
6. Choose the automatic start option.
7. Repeat the steps above for each of the FEP PCs.
3.4.8 Installing the software on the client
When you install MK8000 on a client, you need to know the name of the PC where you
want to install the server (Stand-Alone).
To install the MK8000 test tool on a client station, do the following:
1. Logon to client as Administrator.
2. Insert the DMS8000 Installation CD.
3. Follow the procedure described in section Software setup [➙ 26].
4. In the setup menu, select Test Client Station.
5. Repeat the steps above for each of the Client PCs.
 The functions available in the test client software are detailed in section Testing the
configuration [➙ 65].
3.4.9 Installing the software license station (dual-server)
In case of dual server solution based on Marathon EverRun FT [➙ 21], each of the
physical servers must be equipped with the license station software, which is capable
of handling the dongle checks, which cannot be managed by the virtual server that
hosts the actual MK8000 software.
To install the license station, do the following:
1. Logon as Administrator.
2. Insert the DMS8000 Installation CD.
3. Follow the procedure described in section Software set-up [➙ 26].
4. In the setup menu, select License Station and follow the setup procedure.
5. Repeat the steps above for the other license station.