User Manual

Configuring MK8000
4
Configuration checklist
54
Building Technologies A6V10062407_a_en
Fire Safety & Security Products 30.06.2013
– Intrusion subsystems
(DMS8000 Intrusion Connectivity configuration guide)
– Video network
(DMS8000 Video Connectivity configuration guide)
– Access Control system
(DMS8000 Access Control Connectivity configuration guide)
 Configure the communication network.
(DMS8000 Network Connectivity configuration guide)
 Link the subsystems to the communication network.
(DMS8000 Fire Connectivity configuration guide).
(DMS8000 Intrusion Connectivity configuration guide)
 Add the required Communication Drivers.
– MK8000 Communication drivers [➙ 57]
 Connect the MK8000 with the network and FEP stations.
(DMS8000 Network Connectivity configuration guide).
 Adjust network settings (baud rate, ports, etc).
(DMS8000 Network Connectivity configuration guide)
 Set vitality (mandatory if connecting CS11 without MK7022).
– Setting vitality [➙ 58]
 Set OPC group names (subsystems).
– Setting OPC Group names and acce
ss limitations [➙ 59]
 Set up the Multi-state value data format.
– Setting the Multi-state value data format [➙ 60]
 Set up the diagnostic log.
– Setting up the diagnostic log [➙ 61]
 Downloading the configuration to the MM8000.
– Downloading [➙ 62]
 Test the configuration.
– Testing the configuration [➙ 65]
 Backup your Project.
(Composer Technical Manual)
 Generate an OPC configuration export file.
– Exporting data to a 3rd party OPC Client [➙ 70]