User Manual

Tips for Integrating with an OPC client

Possible difficulties in integrating an OPC client

Building Technologies

A6V10062407_a_en

Fire Safety & Security Products 30.06.2013

Default Properties tab

Check Enable Distributed COM on this computer. In addition, make sure that the

Default Authorization Level shows Connect and the Default Impersonation Level are

set to Identify. Uncheck the Additional security for reference tracking check box (match

the settings in the following figure).

Default Properties tab

Default Protocols tab

We recommend that you use Connection-oriented TCP-IP. You should have the

preferred protocol at the top of the list in this tab.

Set your Default Protocols tab to look like the following figure (note that some of the

protocols below TCP-IP may be missing).

Default Protocols tab