User Manual

Tips for Integrating with an OPC client
6
Possible difficulties in integrating an OPC client
80
Building Technologies A6V10062407_a_en
Fire Safety & Security Products 30.06.2013
6.4.2.5 Specific MK8000 DCOM settings
To select the MK8000 DCOM properties, perform the following steps:
1. In the Component Service window, right-click the node:
Component Services > Computers > My Computer > DCOM Config >
MM8000Server.
2. In the menu that appears, select Properties.
Selecting the server component for detailed DCOM configuration
General tab – MM8000Server Properties
We recommend leaving the Authentication level on Default. This means that the server
will use this method of determining who will be allowed access that was set up on the
Default Properties tab in the DCOM Config utility.
The General tab should look like the following figure: