User Manual

Installation
6
Building Technologies 008751_b_en MaxSys - MM8000 3.20 add-on.doc
Fire safety & Security Products 05.2005
2.2 Software installation
2.2.1 Requirements
The support for MAXSYS does not add any special requirements to the standard
MM8000 MP3.20. Therefore, software and hardware requirements are the same as
for the base MM8000 MP3.20 software, as described in the document no. 006799,
MM8000 Installation, Configuration and Commissioning.
As far the NK8000 network is concerned, the requirements are described in he
document no. 007798, NK8000 Installation, Configuration and Commissioning.
MM8000 MP3.20 must be properly installed before the add-on can be installed. For
more information on the MM8000 MP3.20 installation, please see the mentioned
006799 document.
The MAXSYS add-on package is designed to work with MM8000 MP3.20. If you
are working with another version, please contact FSP-DMS support to verify its
compatibility or the availability of a compatible add-on package.
2.2.2 Software License
An additional license is required to run the MAXSYS module. On top of the base
MM8000 MP3.2 license codes, a specific PAK is therefore needed.
Therefore, the required license includes:
• WW8000 Composer (project configuration and download): Composer License
or Service key.
• NS8210 driver: NK8000 connections, indicating the number of NK822x units.
This license is required for enabling the network driver and the NK822x units
communicating with the MAXSYS control units.
• MM8000 core, no. of subsystems.
This license should include the number of MAXSYS control units.
• MM8000 core, no. of devices.
This license should include the number of MAXSYS physical objects (detectors,
auxiliary and control outputs).
• MAXSYS add-on license.
 Check detailed sales policy for your country.
Other licenses, covering more MM8000 options, may or may not be used and they
are not related to the MAXSYS support.
2.2.3 MAXSYS add-on installation
The following are the installation procedures for the MAXSYS add-on module.
1. Copying files
The add-on installation is quite simple. The installation kit includes the ‘MM8000
– ST extension Installation.exe’ utility (Fig. 2 below). Just run this program and
the add-on files will b
e copied onto the local hard disk in the appropriate folders.