User Manual

Installation

Building Technologies 008751_b_en MaxSys - MM8000 3.20 add-on.doc

Fire safety & Security Products 05.2005

2. Start Composer and open the project that includes the MAXSYS units.

3. Expand the ‘Channel collection’ folder in:

Supervision System Settings  MM8000 System  Physical configuration 

Station (or FEP)  Channel collection.

4. Select the ‘NS8210 driver’ node and then the ‘Download’ tab (Fig. 6).

Fig. 6 ‘Download’ tab

5. Select all the branches (NK822x) in the list located in the upper part of the form.

Note: In order to select multiple branches, keep the CTRL key pressed while

you make your selections.

See the following Fig. 7.

Fig. 7 Selecting the NK822x

6. Add the new firmware version:

– Click ‘Add’, then browse and locate the additional firmware file in:

<MM8000 installation folder>\NK822x – Firmware

– Then, click the file:

Nk822x_MaxSys_3.20-00_02.zip

– And finally click ‘Open’ (Fig. 8).

 In a few m

oments, the new firmware shows in the Firmware List (Fig. 9).