User Manual

Configuration
12
Building Technologies 008751_b_en MaxSys - MM8000 3.20 add-on.doc
Fire safety & Security Products 05.2005
3 Configuration
3.1 Configuration checklist
Verify that you have satisfied the items needed in the first checklist before proceed-
ing to the configuration checklist that follows.
ITEMS NEEDED FOR CONFIGURATION

The intrusion system architecture: number of control units (PC6010) and interfaces
(PC6442)

The encryption key for the communication security (=0 if no encryption is required).

The local address (1 to 32) for each control unit.
Note: the address is automatically assigned by Composer sequentially. Therefore, the
units should be inserted following the address sequence, from 1 to ‘n’.

The metafile(s) generated by the Panel Reader tool (CSV file) OR
the exact informa-
tion on the control units internal configuration.

The exact connection to the NK8000 unit (NK822x).

Plug-ins needed:
– Plug-in #354101 (PC6442 interface)
– Plug-in #354001 (PC6010 control unit)
These are both installed during the installation procedure.
CONFIGURING A MAXSYS

1. Add the folder(s) required for identifying the location of the MAXSYS in the project
structure tree.
p. 13

2. Add the MAXSYS main node (PC6442 interface) to the new folder
p. 13

3. Set the encryption key, if used
p. 13

4. Add the MAXSYS control unit (Panel Application)
p. 14

5a. Import the metafile
p. 14
-- or --
5b. Configure the objects manually
p. 16

6. Repeat steps 2 to 4 for all the MAXSYS units of the system

7. Link the MAXSYS to the communication network
p. 16

8. Repeat steps above for all the MAXSYS systems in the project

9. Download the configuration
p. 17