User Manual

Configuration
17
Building Technologies 008751_b_en MaxSys - MM8000 3.20 add-on.doc
Fire Safety & Security Products 09.2006
Fig. 15 Link MAXSYS to the NK8000 network
 When the link is established, a new node appears on the structure tree, and
its properties can be seen on the ‘Link’ tab of both the connected nodes.
Downloading the MM8000 configuration
Before operating with the new MM8000 configuration, you need to download it. In
Composer, the download command is available in the Tools menu. The prepara-
tion to the download is discussed in the document no. 006799, MM8000 Installa-
tion, Configuration and Commissioning.
Downloading the NK822x configuration
After any modifications on the MAXSYS systems, a new configuration download is
required for the NK822x devices.
Warning: the NK822x units handle the MAXSYS messages interpretation for MM8000.
In order to do so, the NK822x needs to be downloaded with the updated configuration of
the management stations, even after a minor modification to the subsystem structures
(e.g.: after having imported an updated metafile including new objects).
Depending on the specific configuration change, failing to download the NK822x units
may affect the correct behaviour of the telegram interpretation and result in missing
event signalling. In general, we recommend including an NK882x download after any
change in the configuration.
The download procedure can be started in two ways:
1. In the ‘Download’ tab of the ‘NS8210 driver’ node:
– Select: Supervision System Settings  MM8000 System  Physical con-
figuration  Station (or FEP)  Channel collection  NS8210 driver (Fig. 6)
– in the list that shows up, select the NK822x units
Note: In order to select multiple branches, keep the CTRL key pressed while
you make your selections.
– click the button “Download Configuration”
– ensure that you have successfully completed all downloads
 Verify that the “Cfg Downloaded” checkboxes contain ‘X’s (Fig. 7)
2.
In the ‘NS822x’ node (select all units one after the other):
– Right click the node
– In the menu, click “Node commands”  “Download file CNF”