User Manual

Operations
19
Building Technologies 008751_b_en MaxSys - MM8000 3.20 add-on.doc
Fire Safety & Security Products 09.2006
Node Alarms Faults Other events
PC6442
interface node
Tamper Fault: - internal fault
- RS232 fault
Backbone Fault: - internal fault
- connection fault
Advisory
Power supply Fault: - AC fault
- battery fault
PC6443
Interface
Tamper Fault: - internal fault
- RS232 fault
Panel
(Control Unit)
Fault: - connection
fault
Anomaly: - restart
- default
Advisory: - test
Primary line Fault: - line fault
Infranet Fault: : - line fault
PC6010
Main board
Fault: - internal fault
Zone Severe alarm
Tamper: - open/short line
Fault: - internal fault Exclusion: - disabled
- disconnected
Advisory: - bypassed
Bell output Fault: - internal fault Advisory: - active
- test
Output, TLM Advisory: - active
Backbone Fault: - connection
fault
Power supply Fault: - AC fault
- battery fault
Combus Tamper Fault: - pwr supply fault
- connection fault
PC6108A
zone expander
Tamper Fault: - pwr supply fault
- connection fault
PC6501
LCD keypad
Tamper Fault: - pwr supply fault
- connection fault
Advisory: - authorised
access
PC6400
serial interface
Tamper Fault: - pwr supply fault
- connection fault
PC6204
output module
Tamper Fault: - pwr supply fault
- connection fault
Advisory: - propagat.active
PC6216
output module
Tamper Fault: - pwr supply fault
- connection fault
PC6820 Access
control module
Tamper Fault: - internal fault Advisory
Area Fault: - fire fault
- automatic off
Exclusion: - off duty
- partially off
Anomaly: - not ready
Advisory: - activation
User Sev.alarm: - acc.ctrl alarm
- duress alarm
Advisory: - logged in
Note: all objects can also be affected by the Maintenance event according to the
MM8000 function that allows setting any part of the system tree in maintenance
mode and divert the associated events into a separate list.