User Manual

Introduction

Building Technologies 008751_b_en MaxSys - MM8000 3.20 add-on.doc

Fire Safety & Security Products 09.2006

1 Introduction

The MAXSYS is an intrusion security system based on the PC6010 control unit,

which can support up to 256 zones (16 on the main board and the rest on

PC6108A 8-zone expansion modules) in 32 separate areas.

The user interface is based on the PC6501 panels (max 64), which can guide us-

ers through the available options according to their access level (basic, advanced,

supervisor, or master).

The PC6010 main board comes with 2 programmable outputs, and you can add up

to 208 more using PC6204 (4-relay) and PC6216 (16-transistor) modules.

Access control functions can be supported by the MAXSYS system: up to 32

doors, using the 2-door modules PC6820.

The status of the PC6010 system can be monitored over a dedicated and multi-

point “backbone” network and PC6442 and PC6443 interface modules. Communi-

cation to an external system can be encrypted.

MAXSYS integrated into MM8000

The MM8000 can support the MAXSYS systems over the NK8000 network devices

(NK8222 for connecting a single system, NK8223 or NK8225 for up to 4 systems).

Each NK822x serial port can support up to 32 PC6010 units via a PC6442 inter-

face.

MAXSYS access control functions are not supported by the MM8000.

1.1 Version supported

MM8000 MP3.20 with MAXSYS extensions can support the MAXSYS Firmware

version 2.11.