User Manual

Building Technologies
Fire Safety & Security Products
The `Function` object represents a set of control actions to be performed on a physical device, e.g. closing a door, opening a valve, etc. The functions are logically made up of a number of elements.
Security function - ( GSDEZOGE )
Multistate Commands
1-Ack 2-Reset 4-Arm 8-Disarm 16-Test 32-Active 64-Quiet 128-Disc 256-Conn 512-Block 1024-Man 2048-Status
946 Active Unack
Following an alarm detection, the appropriate functions have been activated and the correspondent actions are in progress; the event should be acknowledged by the operator.
947 Active Ack
Following an alarm detection, the appropriate functions have been activated and the correspondent actione are in progress; the event has been acknowledged.
948 Active Unreset
Following an alarm detection, the appropriate function was activated and the correspondent actions performed; the event should now be reset by the operator.
1000 Quiet
No abnormal condition present.
1305 Disarmed Ack
The function has been disarmed and cannot be started; the event has been acknowledged.
1306 Disarmed Unack
The function has been disarmed and cannot be started; the event should be acknowledged by the operator.
1319 Manual Ack
The function has been set into manual mode: automatic action will not be performed; manual activations are still possible with an operator command; the event has been acknowledged.
1320 Manual Unack
The function has been set into manual mode: automatic action will not be performed; manual activations are still possible with an operator command; the event should be acknowledged by the operator.
1998 Fault Unreset
A faulty condition occurred in one of physical components involved in the function; a fault can be detected internally in the STT11 and via the missing/erroneous start/finish activation feedback; the fault event
is now terminated should be reset by the operator.
Page 11 of 16