User Manual

Building Technologies
Fire Safety & Security Products
The `Element` object represents the conditions related to a the control outputs and state inputs of a physical device, such as a door, a valve, etc.
Element - ( GSDEDEGE )
Multistate Commands
1-Ack 2-Reset 4-Arm 8-Disarm 16-Test 32-Active 64-Quiet 128-Disc 256-Conn 512-Block 1024-Man 2048-Status
946 Active Unack
Following a function activation, the appropriate elements have been activated to perform the output control; the event should be acknowledged by the operator.
947 Active Ack
Following a function activation, the appropriate elements have been activated to perform the output control; the event has been acknowledged.
1000 Quiet
No abnormal condition present.
1501 Disconnected Ack
The element has been excluded and cannot be used; the event has been acknowledged.
1502 Disconnected Unack
The element has been excluded and cannot be used; the event should be acknowledged by the operator.
1999 Fault Ack
A faulty condition has been detected in one of physical componentsof the element; a fault can be detected internally in the STT11 and via the missing/erroneous start/finish activation feedback; the event has
been acknowledged.
2000 Fault Unack
A faulty condition has been detected in one of physical componentsof the element; a fault can be detected internally in the STT11 and via the missing/erroneous start/finish activation feedback; the event
should be acknowledged by the operator
Page 13 of 16