User Manual

Building Technologies
Fire Safety & Security Products
The `unindentified event` indicates the conditions which could not be associated with any known object in the current structure. This typically happens when the logical tree imported into the system configuration
does not exactly match the local STT11 set
Unidentified event - ( SYNOUDGE )
Multistate Commands
1-Ack 2-Reset 4-Arm 8-Disarm 16-Test 32-Active 64-Quiet 128-Disc 256-Conn 512-Block 1024-Man 2048-Status
401 Alarm & Tamper Ack
Alarm + tamper conditions from unknown STT11 object.
501 Alarm Ack
Alarm condition from unknown STT11 object.
511 Alarm & Fault Ack
Alarm + fault conditions from unknown STT11 object.
901 Tamper Ack
Tamper condition from unknown STT11 object.
911 Tamper & Fault Ack
Tamper + fault conditions from unknown STT11 object.
1000 Quiet
No abnormal condition present.
1300 Disarmed
Disarmed condition from unknown STT11 object.
1351 Anomaly Ack
Anomaly condition from unknown STT11 object.
1999 Fault Ack
Fault condition from unknown STT11 object.
Page 5 of 16