User Manual

About this document
6
Building Technologies
A6V10316242_a_en
CPS Fire Safety
31.05.2019
3. In the resulting area on the right, click on Contents link to show the list of
search results.
4. In the list, select one or more documents and click the Download Assets icon.
5. After the download preparation completes (Background Process …), click
Download and follow the instructions of your browser.
For more information such as Siemens news and announcements, visit the STEP
Web portal at:
https://workspace.sbt.siemens.com/content/00001123/default.aspx
Operational and safety regulations
Before groups of persons begin work on the system, they must have read and
understood the Safety Regulations [➙ 9] section in this manual.
Liability disclaimer for damage or injuries
Before products are delivered, they are tested to ensure they function correctly
when used properly. Siemens disclaims all liability for damage or injuries caused
by the incorrect application of the instructions, or the disregard of danger
advisories. This disclaimer applies in particular to personal injuries or damage
caused by:
 Improper and/or incorrect use.
 Disregard of safety instructions in the documentation or on the product.
 Poor maintenance or a lack of maintenance.
We have checked the contents of this manual for agreement with the hardware and
software described. Since deviations cannot be precluded entirely, we cannot
guarantee full agreement. However, the data in this manual are reviewed regularly
and any necessary corrections are included in subsequent editions. Suggestions
for improvement are welcome.
Copyrights and registered trademarks
Brand or product names mentioned in this document may be names protected by
copyright law or registered trademarks of other companies. These are mentioned
only for identification purposes and have no recommendatory character in regard to
the product or manufacturer, unless otherwise stated.
Documentation Conventions
The following table lists conventions to help you use this document in a quick and
efficient manner.
Convention
Examples
Numbered Lists (1, 2, 3…) indicate a
procedure with sequential steps.
1. Turn OFF power to the field panel.
2. Disconnect the power cord.
3. Open the cabinet.
One-step procedures are indicated by a
bullet point.
 Expand the Event List.
Conditions that you must complete or must
be met before beginning a procedure are
designated with a ⊳.
Results, after completing a step or at the
end of the entire procedure, are designated
with a ⇨.
⊳ The report you want to print is open.
1. Click the Print icon .
⇨ The Print dialog box appears.
2. Select the printer and click Print.
⇨ The print confirmation appears.