User Manual

About this document
7
Building Technologies
A6V10316242_a_en
CPS Fire Safety
31.05.2019
Bold font in a procedure indicates something
you should select or type.
Type F for Field panels.
Click OK to save changes and close the
dialog box.
Menu paths are indicated in bold.
Select File > Text, Copy > Group, which
means from the File menu, then select Text,
Copy and finally Group.
Error and system messages are displayed in
Courier New font.
The message Definition
successfully renamed displays in the
status bar.
Italics are used to emphasize a term.
The Open Processor continuously executes
a user-defined set of instructions called the
control program .
This symbol signifies a Note. Notes provide
additional information or helpful hints.
Caution
This is a Caution message and indicates
that minor or moderate injury or property
damage may occur if a procedure is not
followed.
Warning
This is a Warning message and indicates
that a serious injury or a severe equipment
and property damage may occur if a
procedure is not followed.
Cross references to other information in
printed material are indicated with an arrow
and the page number, enclosed in brackets:
[→92]
For more information on creating flowcharts,
see Flowcharts [→92].
Modification index
Note: For versions more than four years old, please visit the Siemens Asset Portal.
Modification index
Version
Date
Notes
A6V10316242_a_en
05.2019
Corresponds with MP4.81-02
- Updated classes for FS20 MP7.0: see What's new [➙ 11]
- Check and alignment of the documented FS20/STT20 fire
object lists
A6V10316242_a_en
11.2017
Corresponds with MP4.81-01
- Register 6100 (WT_Section): bit 15 is not used.
A6V10316242_a_en
09.2016
Corresponds with MP4.81
- New WT_Section Active state
- New FS20 MP6.0 Objects in WT_Section, WT_Ctrl,
WT_LogChan, and WT_HWObj
- New WT_NK8237Point Fault state
- New NK8237 Clock object
A6V10316242_a_en
09.2015
Corresponds with MP4.80
A6V10316242_a_en
09.2014
Corresponds with MP4.70
A6V10316242_a_en
06.2013
Corresponds with MP4.60