User Manual

13
Building Technologies MM8000 OPC Connectivity Configuration Guide
Fire Safety & Security Products 06.2007
 The DMS8000 OPC class to apply for treating the OPC data (optional, but
recommended)
 OPC classes are discussed in section 4 on page 29.
Note that, if the CVS file does not include the class information, this
needs to be configured manually as described on page 15 (“Configuring
the OPC item classes …”).
– Select the corresponding column in the three fields on the top of the window
(Fig 9). Only the first column is mandatory to execute the import. After the se-
lection, press Next to proceed.
Fig 9 Step 2 of Import Wizard: select columns
– Finally, check that the column selection is correct and click Finish to start exe-
cuting the import (Fig 10).
Fig 10 Step 3 Import Wizard: check selection and finish
In a short while, the OPC items will be imported, thus populating the Composer
tree below the OPC driver link (Fig 11).
Note that, although you may customise the OPC items in Composer by adding, re-
naming or deleting objects, we recommend you to keep the CSV file updated first and
then import it again.