User Manual

Documentation
28
Fire & Security Products 008091_a_en MM8000 MP2.31 Release Notes.doc
Siemens Building Technologies Group 02.2004
6.2 Technical documentation
MM8000 Operation Manual
This manual is an operation guide, meant for final users.
Note: This document has been updated to reflect the new features (given at p.5)
included in MP2.31.
MM8000 Installation, Configuration and Commissioning (ICC)
This guide is meant for commissioning engineers and technicians. The ICC guide
contains information about system limits, and hardware and software requirements.
It provides step-by-step procedures for installation and configuration of the
MM8000. During configuration, this manual should be used in tandem with the
DMS8000 Connectivity Configuration guide.
Note: This document has been expanded to provide more detailed guidance and
tips based on field experience. In addition to being updated to reflect the changes
made in 2.31, procedures for configuration of features are more complete, and the
document provides more guidance about the workflow that should be followed dur-
ing configuration.
The installation checklist at the end of the document is intended to be used as an
aid in gathering information from the customer prior to beginning configuration.
MM8000 Localisation Guidelines
This guide provides assistance with the localisation of the MM8000 software, in-
cluding information about using Catalyst.
Note: This document has been updated to reflect the new tools added in MP2.31.
Maintenance & Troubleshooting
This troubleshooting guide includes known problems encountered during and after in-
stallation configuration & commissioning coming from all DMS8000 products.
 The previous MK8000 guide has been replaced by a general DMS8000 document
that includes potential problems associated to MK8000, MM8000, and MT8000.
DMS8000 Connectivity Guide
Meant for commissioning engineers and technicians, the DMS8000 Connectivity
Configuration guide has been created for use with all FSP-DMS products. Since
the configuration process for networks and subsystems in Composer is the same
for all products in the DMS8000 family, that part of the procedure is now in this
document. It should be used in tandem with the MM8000 Installation Configuration
& Commissioning guide.
In an effort to facilitate the use of these documents, there are a number of workflow
checklists, both in the ICC and in the DMS8000 Connectivity Configuration guides.
Note: This document has been updated to reflect the new features in NK8000
(CDI-WAN) network and the support for Philips/Burle CCTV, and other minor modi-
fications.
Release Notes
Note that unlike the other documents, which maintain the same edms number but
change versions (i.e. 006799_a_en in MP2.20 become 006799_b_en in MP2.30), this
document has a completely new number. The previous release notes will be main-
tained in edms so that upgrades over more than one release (for example MP2.20 to
MP2.31) are easier to manage.