User Manual
What’s new in MP2.31
2 What’s new in MP2.31
This section details the differences between the new MM8000 MP2.31
and the previous MP2.30.
2.1 New networks & subsystems supported
This section lists the entire set of network and subsystem devices that can be con-
nected to MM8000 MP2.31.
2.1.1 Networks & connectivity supported
The following network configuration types are supported:
– Cerloop – same as 2.30.
– CDI-Net – same as 2.30.
– NK8000 (CDI-WAN) – New features in MP2.31 see p.5.
The following network components are supported:
– MK7022 (ISO1745/Cerloop) – same as 2.30.
– CK11 (ISO1745) – same as MP2.30.
– GW20 and GW21 (CMSDL/CDI-Net) – same as 2.30.
– NK822x over serial line (NK8000 MP2.11) – New in MP2.31 see p.5.
– NK822x over LAN/WAN (NK8000 MP2.11) – Improved in MP2.31 see p.5.
2.1.2 Subsystems supported
Fire & Gas Subsystems
– CS11 AlgoRex® EP7 – Improved in MP2.31 see p.6.
– CS11 AlgoRex® EP5 – Improved in MP2.31 see p.6.
– STT11 (système de télécommande et télésignalisation) – same as MP2.30.
– CZ10 – same as MP2.30.
– CC60 – Issues resolved in MP2.31 see p.19.
Intrusion Subsystems
– CS440 – same as MP2.30
– CS4 – Improved in MP2.31 see p.6.
– CZ12 – same as MP2.30.
– CS6 Guarto MP3 – same as MP2.30.
Note that the latest “MP3+” release can work with MM8000 but it is not fully
supported. Specifically, some newly added information about CT6 and Power
supply states are not handled.
Other Subsystems
– DMS7000 units, including MM- and MF-7033– same as MP2.30.
– Simatrix CCTV (16-4; 64-8; SYS) – same as MP2.30.
– CF9000 I/O subsystem (DF8020/8040/8045/8046) – same as MP2.30.
– Philips/Burle CCTV (LTC 8xxx) – New in MP2.31 see p.6.
4
Fire & Security Products 008091_a_en MM8000 MP2.31 Release Notes.doc
Siemens Building Technologies Group 02.2004