User Manual

ManualsBrandsSiemens ManualsFire - DMS8000 Network & TerminalsMT8001 MP3.15 Management Terminal Installation Function & Configuration Commissioning Safety Regulations

What’s new in MP2.31

Fire & Security Products 008091_a_en MM8000 MP2.31 Release Notes.doc

Siemens Building Technologies Group 02.2004

2.2.4 Subsystems

Philips/Burle CCTV

MM8000 MP2.31 can now support the LTC8000 family of switchers via NK8000

MP2.11 networks.

Note that the MM8000 connectivity solution to Philips/Burle applies only to NK822x

MP2.11 and it is technically not compatible with older Burle solutions for LMS over

CDI-NET network. In other words:

 Old CDI-NET options for Philips/Burle are compatible with LMSmodular only.

 New NK8000 options for Philips/Burle are compatible with MM8000 and MK8000

only.

 See 007083 DMS8000 Connectivity Configuration Guide.

The Philips/Burle LTC8000 family includes various switching units ranging from 8

to 4096 camera inputs, and from 2 to 512 monitor outputs. Alarms inputs (8 to

1024) are also supported to trigger alarm-handling switching procedures.

The list of compatible models (supporting the Allegiant® Main CPU Interface Soft-

ware / Command Console Language) includes:

 LTC8100: 8x2

 LTC8200: 16x5

 LTC8300: 32x6

 LTC8500: 64x8

 LTC8600: 128x16

 LTC8800: 256x64

 LTC8900: 4096x512

 For specific information about Burle CCTV systems, see

http://www.burlecctv.com/matrix.htm

CS11 AlgoRex

EP5

 “Partially off “ and “Fault” conditions now available at Area level. (ref. #3193

#3194)

CS11 AlgoRex

EP7

 In the CC11 EP7 data tree, the Elements have been moved from the physical to

the logical structure. Note that this applies to new MP2.31 configurations, pro-

jects generated with previous model do not change and they are still fully sup-

ported.

 The new telegram related to the detector “application error” is now supported.

 A new telegram to set the Remote Transmission Channels OFF has been

added.

 An option for transmitting a general acknowledgment when treating an alarm is

now supported for each of the CC11 units. If enabled, it results in acknowledging

the entire set of the alarm-related events with a single command.

CS4 (early CC440 releases)

 Support is provided for special CS4 versions, actually early CC440’s equipped

with the CK4 gateway. This version can manage up to 254 zones and 100 sec-

tions (ref. #5024, #5256).