User Manual

6 System tests

Go to the Service page from the main Menu. This is where you check if different parts of the

system are functioning properly.

Fig. 8 Service menu page

MT8001 Management Terminal MP4.20

Operation

Quick Reference Guide

Note: This operation quick reference is based on the standard graphic user interface (GUI).

Please refer to the MT8001 Operation Manual for the EN 54 Norm and ULC GUI.

Siemens Switzerland Ltd

Building Technologies Group

International Headquarters

Fire Safety & Security Products Tel +41 41 724 24 24

Gubelstrasse 22 Fax +41 41 724 35 22

CH-6301 Zug www.sbt.siemens.com

Building Technologies

Document no. A6V10096142_a_en MT8001 Technical Material

Edition 06.2009 Section 6

Fire Safety & Security Products

Select a button to

perform a system test

PAGE 1
6 System tests Go to the Service page from the main Menu. This is where you check if different parts of the system are functioning properly. Select a button to perform a system test MT8001 Management Terminal MP4.20 Operation Fig. 8 Service menu page Quick Reference Guide Note: This operation quick reference is based on the standard graphic user interface (GUI). Please refer to the MT8001 Operation Manual for the EN 54 Norm and ULC GUI.
PAGE 2
1 MT8001 Management terminal 5 Commands and user feedback messages Go to the User commands page from the main Menu. This is where you easily and quickly perform complex commands configured specifically for you. Fig. 1 MT8001 Management terminal Item: A B C D E 1.
PAGE 3
4 History Browser 2 View previous event details (organised by date) on the Protocol and Report pages. Event Browser Get to the Event Browser by selecting the Event Browser button on the main Menu page. 2.1 Fast treatment Quickly treat an event directly in the Event list by using the treatment icons.
PAGE 4
2.2 3 Assisted treatment Select an event, then view up to four assisted treatment pages by selecting the assisted icon This section tells you how to use the Plant Browser to exclude an area. To: Select: Command treatment icon (e.g. - see “B” below) Assisted treatment page icon (see “D” through “G”) . Properties page icon Suspend icon . Plant Browser (see “C”) .......................... (see “A”) ......................................