User manual

Choose a TCP/IP entry whose name contains Ethernet adapter. Do not choose

a TCP/IP entry whose name is PPPoE, VPN or other.

If there is no TCP/IP line listed, refer to the User Manual on your Siemens CD-

ROM to install TCP/IP now.

Windows 98 users need the Windows 98 Installation CD to complete the

installation.

1. Click on Start -> Settings -> Control Panel.

Double-click on the Network icon to open

the Network screen.

2. Select the Configuration tab and highlight

the TCP/IP line for the applicable Ethernet

adapter

. If the word TCP/IP appears by itself,

select that line

. Click on Properties.

3. Click the IP Address tab and select Obtain

an IP address automatically.

4. Click on the Gateway tab and verify that the

Installed Gateway field is blank. Click on

OK.

5. Click again on OK. Windows may ask you for

the original Windows Installation disk or

additional files. Supply them by pointing to

the correct location, e.g. D:\win98, where

“D” represents the letter of your CD-ROM

drive.

6. If Windows asks you to restart your PC, click

on Yes. If Windows does not ask, restart

your computer anyway.

7. Go to Step 5 on page 16 to complete the

configuration.

Step 3a:

Configure the PC (TCP/IP settings)

for Windows 98 and Windows ME