Installation Instructions

Siemens Building Technologies
Fire Safety
P/N 315-050253-011
Figure 17 NCC MP7 Current Settings List
The Current Settings list will show the components being installed as
follows:
NCC-MP7
NCC Web Interface (Window XP Only if not already installed))
Click on Next. The installer will copy the files and the install will be com-
pleted (refer to Figure 17).
If this is an upgrade, the installation in complete. Restart XP by selecting Start-
Shutdown-Restart. For new installations or re-installations, continue with Step 11.
11. Log off as user "firefinder" by clicking on Start> Log off firefinder.
12. Log in as "Administrator" again. Open up the User Accounts once again and
locate the firefinder user. (Refer to Step 1.)
• Double click on "firefinder" in the User Manager window.
• Click on the Group Membership button in the User Properties
window.
• In the Group Memberships window select the Others radio button,
then select Users from the combo box.
• Click OK.
• Click OK again on the next window.
• Close the User Accounts.
• Reboot Windows XP™