User's Manual

Automation and Drives - SCE

T I A Training Document Page 17 of 25 Module

9. In the next step, we drag the CPU 314C-2DP onto the second slot. When this is being done, the

order number and the version of the CPU can be read on the front of the CPU. (→ SIMATIC

300 → CPU-300 → CPU 314C-2DP → 6ES7 314-6CF00-0AB0).

10. In the following dialog box, we now want to set up the integrated PROFIBUS interface. Because

we will not use the interface here, we accept the settings with 'OK'( → OK ).

Note: Slot No. 3 is reserved for interface modules and therefore remains empty. Other modules

which are not interface modules (IM) are therefore placed on slots 4 to 11.

Foreword Notes Hardware configuration STEP 7 program Testing

Issue date: 02/2008 Programming the CPU 314C-2DP