User's Manual

Automation and Drives - SCE
T I A Training Document Page 2 of 25 Module
This document has been written by Siemens AG for training purposes for the project entitled "Siemens
Automation Cooperates with Education (SCE)".
Siemens AG accepts no responsibility for the correctness of the contents.
Transmission, use or reproduction of this document is only permitted within public training and educational
facilities. Exceptions require the prior written approval of
Siemens AG (Mr. Michael Knust
michael.knust@siemens.com).
Offenders will be liable for damages. All rights, including the right to translate the document, are reserved,
particularly if a patent is granted or utility model is registered.
We would like to thank the following: Michael Dziallas Engineering, the teachers at vocational schools, and all
others who helped to prepare this document.
A5
Issue date: 02/2008 Programming the CPU 314C-2DP